Alright - maybe you remember me from my last post about the glass, where I actually broke the class, but that allowed me to clean between the two sheets, so not really bad, but not really good - neutral, maybe?

I am attaching the picture of the Cam on the lock. The lock is a standard Omron and I followed this thread to remove the springs and tumblers and brass pieces:
https://www.pachitalk.com/forums/loc...=65&linkid=546

It turns nicely now with a 9/16 allen wrench BUT I can NOT figure out how to set the cam so that it actually engages the up or down latches (to open just the class or to open the whole case).

When I got the machine it only had one screw holding in the lock. I am thinking, now, that it is mismatched and the cam that is with it is actually for a different machine. IF you have a Sankyo Fever Wanted, can you post a picture of the cam on the back of the lock? This is referred to as the "Trip Dog" in the post referenced above.

Thanks in Advance!

Cam on lock.jpg