Results 1 to 8 of 8

Thread: I would like to know what the error codes mean

  1. #1
    Eye Shooter cardwwi's Avatar
    Join Date
    Dec 2009
    Location
    Broken Arrow, OK
    Posts
    957
    Thanks
    2,046
    Thanks Received
    3,803

    Default I would like to know what the error codes mean

    Having a problem with this machine, when I power it up error code shows 8 then A, Alarm sounds and it flashes 0 (Flashes E with out balls)


    Error F.jpg Error B.jpg Error L.jpg

    Any help would be welcome.
    Attached Images Attached Images
    Last edited by cardwwi; 05-05-2020 at 12:33 PM.
    Unless you try to be more than you are, what you are is all you will ever be.
    http://www.pachinkorestorations.com/

  2. #2
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: I would like to know what the error codes mean

    0  正常動作
    8  打止め
    A  役物基板未接続
    F  下皿玉詰まり
    H  夕ソク玉無し

    0 Normal operation
    8 Stop
    A accessory board not connected
    F lower plate ball jam
    H no evening balls

    As best as Google translate and my IME pad work is

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  3. The following 2 users say "Thanks" to compirate


  4. #3
    Eye Shooter cardwwi's Avatar
    Join Date
    Dec 2009
    Location
    Broken Arrow, OK
    Posts
    957
    Thanks
    2,046
    Thanks Received
    3,803

    Default Re: I would like to know what the error codes mean

    Thanks, The display starts to work then goes blank and light around it flash and the alarm will not stop sounding. I have push reset and power on and off and the error code flash 0. I have three of these machine with the same problem, any idea?
    Unless you try to be more than you are, what you are is all you will ever be.
    http://www.pachinkorestorations.com/

  5. #4
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: I would like to know what the error codes mean

    Is it loaded with balls? Have you done the 'check every connector' thing yet?

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  6. #5
    Eye Shooter cardwwi's Avatar
    Join Date
    Dec 2009
    Location
    Broken Arrow, OK
    Posts
    957
    Thanks
    2,046
    Thanks Received
    3,803

    Default Re: I would like to know what the error codes mean

    flashes 0 with balls loaded Flashes E with out balls loaded, I can't see any unplug wires but have not gone and checked ever connection to make sure they are all setted. There are some empty jacks but I think they are for the parlor to hook up to the machine.
    Quote Originally Posted by compirate View Post
    Is it loaded with balls? Have you done the 'check every connector' thing yet?
    Unless you try to be more than you are, what you are is all you will ever be.
    http://www.pachinkorestorations.com/

  7. #6
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: I would like to know what the error codes mean

    If by unconnected jacks you mean the upper right of the back, yes, those are generally parlor connections.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  8. #7
    Eye Shooter cardwwi's Avatar
    Join Date
    Dec 2009
    Location
    Broken Arrow, OK
    Posts
    957
    Thanks
    2,046
    Thanks Received
    3,803

    Default Re: I would like to know what the error codes mean

    Yes, also there is one under the back cover I think is for testing and or reprograming.

    IMG_20200506_081550598.jpg IMG_20200506_081648788.jpg
    Quote Originally Posted by compirate View Post
    If by unconnected jacks you mean the upper right of the back, yes, those are generally parlor connections.
    Unless you try to be more than you are, what you are is all you will ever be.
    http://www.pachinkorestorations.com/

  9. #8
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: I would like to know what the error codes mean

    Upper right could be frame outputs, under cover cell outputs.

    Clearest one I could see:

    回転 Rotation

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

Similar Threads

  1. Error Codes!!
    By hanabi in forum Suggestion Box
    Replies: 3
    Last Post: 07-14-2022, 05:38 PM
  2. Error codes
    By maxmouse24 in forum Modern Pachinko
    Replies: 1
    Last Post: 11-02-2018, 02:57 AM
  3. E-0 and E-4 Error Codes.
    By N8IWS in forum Pachislo Technical Support Tickets
    Replies: 0
    Last Post: 11-15-2009, 08:16 PM
  4. Error Codes :
    By bearngg00se in forum Suggestion Box
    Replies: 5
    Last Post: 06-06-2006, 07:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •