Page 2 of 2 FirstFirst 1 2
Results 21 to 35 of 35

Thread: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

  1. #21
    Sandwich Shooter pachi_sloter's Avatar
    Join Date
    Nov 2004
    Location
    Ohio
    Posts
    397
    Thanks
    15
    Thanks Received
    669

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Power / 電源
    Hopper Activated / ホッパー駆動
    Setting / 設定
    Reset / リセット
    Sensor 1 / センサ1
    Sensor 2 / センサ2
    Last edited by pachi_sloter; 05-12-2020 at 02:45 PM.

  2. The following 5 users say "Thanks" to pachi_sloter


  3. #22
    Blind Shooter Cris's Avatar
    Join Date
    Sep 2005
    Location
    UK
    Posts
    83
    Thanks
    11
    Thanks Received
    81

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    If you plug the speakers back in do you get any sound?

    I think Bryan might be onto something, didn't look like the hopper light was lit to me either.

    Have you done a full reset on the machine?

    Cheers

    Cris

  4. The following user says "Thanks" to Cris


  5. #23
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by Cris View Post
    If you plug the speakers back in do you get any sound?

    I think Bryan might be onto something, didn't look like the hopper light was lit to me either.

    Have you done a full reset on the machine?

    Cheers

    Cris
    Sorry Cris, I did not see that there was a 2nd page! I did plug them in and yes I got sound. I have tried what I think is the proper full restart procedure.

    Turn off the machine.
    Insert Key and turn it to reset.
    Turn the machine on while holding the "Change Odds Button"
    Turn the machine off.
    Turn the reset key to the normal mode.
    Turn the machine on.

    Am I missing something?

  6. #24
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    That doesn't sound right.

    https://www.pachitalk.com/forums/sho...l=1#post602764


    Turn off the machine.
    Insert Key and turn it to reset.
    Turn the machine on
    Select the odds setting "Change Odds Button"
    Press the spin lever.
    Turn the key back to normal postion
    Ian #UKPachinko

  7. The following 2 users say "Thanks" to Drunkenclam


  8. #25
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by Drunkenclam View Post
    That doesn't sound right.

    https://www.pachitalk.com/forums/sho...l=1#post602764


    Turn off the machine.
    Insert Key and turn it to reset.
    Turn the machine on
    Select the odds setting "Change Odds Button"
    Press the spin lever.
    Turn the key back to normal postion

    Thanks!!! I will give this a go!

  9. #26
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    I followed the steps and filled the hopper, still have the red LED and the coins fall straight through.

  10. #27
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    21,240
    Thanks
    26,028
    Thanks Received
    11,937

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    I know it's kind of a easy thing to miss but Have you cleaned the token path front and inside the front door cause it does have sensors so that only non-magnetic tokens work (ie No Currency).
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  11. The following user says "Thanks" to takethecastle57


  12. #28
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by takethecastle57 View Post
    I know it's kind of a easy thing to miss but Have you cleaned the token path front and inside the front door cause it does have sensors so that only non-magnetic tokens work (ie No Currency).
    I did take it apart a bit and used cotton swabs and alcohol. I will try again.

  13. The following user says "Thanks" to RForcht


  14. #29
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by Cris View Post
    If you plug the speakers back in do you get any sound?

    I think Bryan might be onto something, didn't look like the hopper light was lit to me either.

    Have you done a full reset on the machine?

    Cheers

    Cris
    I plugged the speakers back in and this time I am getting no sound.

    IMG_0818 (002).jpg

  15. #30
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by Drunkenclam View Post
    That doesn't sound right.

    https://www.pachitalk.com/forums/sho...l=1#post602764


    Turn off the machine.
    Insert Key and turn it to reset.
    Turn the machine on
    Select the odds setting "Change Odds Button"
    Press the spin lever.
    Turn the key back to normal postion

    I printed out the instructions from the link you gave me. It says that there should be a clicking sound from the coin mechanism when I turn the reset key to the off position at the end. There was no click.

  16. #31
    Eye Shooter rockston's Avatar
    Join Date
    Apr 2012
    Location
    Chicago
    Posts
    550
    Thanks
    662
    Thanks Received
    883

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Hi, I have that machine in fully working condition, let me know if you want to test or compare anything. BTW, Yes there is a click when turning off the reset key right after a few reel lights flash briefly.

  17. The following user says "Thanks" to rockston


  18. #32
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by rockston View Post
    Hi, I have that machine in fully working condition, let me know if you want to test or compare anything. BTW, Yes there is a click when turning off the reset key right after a few reel lights flash briefly.
    I am so new to this that I have no clue where to start.

  19. #33
    Tokie Owens pjtnascar's Avatar
    Join Date
    Nov 2010
    Posts
    19
    Thanks
    1
    Thanks Received
    13

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    I feel like your machine is stuck in the odds setting mode. I would make sure that your spin lever is working because if not, you won't be able to get out of the odds changing mode.

    Some machines also have switches on the door or near the door lock that need to be activated.

  20. The following user says "Thanks" to pjtnascar


  21. #34
    Tokie Owens Tam9561's Avatar
    Join Date
    Sep 2021
    Location
    Texas
    Posts
    4
    Thanks
    0
    Thanks Received
    5

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    I had the same Rodeo Ore No Sora type problem No 12 Volts for the power supply D2 LED STAYS ON. All I did was open power supply and soldier all of the Bad crack solder connectors. Everything working find. Also make sure that your Reset wire is plug in on your power supply board. Hope this work for you.
    Last edited by Tam9561; 09-15-2021 at 08:45 PM. Reason: To Complete Reply

  22. The following 3 users say "Thanks" to Tam9561


  23. #35
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Rodeo Ore No Sora Drive 駆動 LED on the Power Supply

    Quote Originally Posted by Tam9561 View Post
    I had the same Rodeo Ore No Sora type problem No 12 Volts for the power supply D2 LED STAYS ON. All I did was open power supply and soldier all of the Bad crack solder connectors. Everything working find. Also make sure that your Reset wire is plug in on your power supply board. Hope this work for you.
    Thank you!

Page 2 of 2 FirstFirst 1 2

Similar Threads

  1. Rodeo Ore No Sora No Picture or Sound Problem
    By Cris in forum Pachislo Technical Support Tickets
    Replies: 9
    Last Post: 05-01-2020, 03:53 AM
  2. Sammy Drive "駆動" light on Power Supply
    By RForcht in forum Modern Pachinko
    Replies: 1
    Last Post: 04-25-2020, 08:53 AM
  3. Pachislot sammy Power cable mainbord or power supply
    By ludolatino3 in forum Yahoo Japan - Auction Area
    Replies: 0
    Last Post: 01-08-2019, 12:11 PM
  4. WANTED: power supply box for Sammy/Rodeo
    By lozpeters in forum Members Trade area
    Replies: 12
    Last Post: 04-11-2016, 04:25 PM
  5. POWER SUPPLY: RODEO GAMERA causing hopper to run...wont shut off.
    By BC3 in forum Pachislo Technical Support Tickets
    Replies: 0
    Last Post: 09-12-2012, 08:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •