Results 1 to 11 of 11

Thread: Help identifying some components

  1. #1
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Help identifying some components

    Hi Experts!!

    It's been a few years since I even worked on my modern (Mole Set V of Flower?),
    IMG_0052.jpg
    I finally located one of the IC chips that I needed to replace, luckily I could read the markings on that one. After I replaced that one, I dug farther into my machine and found another fried circuit board(this is #3 I haven't been able to find anymore, luckily LOL). Only problem is that the capacitor that was next to the chip was completely gone, and the chip was gone enough that I couldn't read any markings.

    I know it's a stab in the dark, but this was the only place I could think of that I would even have a chance to get some info about it. It's the board that's mounted on the back, right behind the LCD screen.
    ICNcap25per.jpg

    I hope the picture is clear enough.

    Thank you for your time!!!

  2. #2
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Help identifying some components

    Sorry I have no idea. But that area looks a lot like a power supply . Is that where the power comes into the machine.
    Ian #UKPachinko

  3. The following user says "Thanks" to Drunkenclam


  4. #3
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: Help identifying some components

    Hey drunken clam! It looks like the first place after the power switch so it seems you’re probably right about power.
    Comes in on the grey wire
    Then it looks like it goes down the black to the left of that board
    That’s the board itself. That lock throws me too, no clue what it’s for.

    Thank you for your time!!

  5. The following user says "Thanks" to wolfie1299


  6. #4
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Help identifying some components

    For a very short period, it was possible to set the odds on certain pachinko games. That's what that lock is for. Not sure where to get a key or how to set them.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  7. The following 3 users say "Thanks" to compirate


  8. #5
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Help identifying some components

    7db79964cabcf0c5dbb810360a83aef4.jpgI need help translating the power supply. When I power my USA machine on, the second red LED(D3) is lit. I have tried a reset, no luck. Thank you.

  9. #6
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Help identifying some components

    Power Supply 電源
    Hopper ホッパー
    Drive 駆動
    Setting 設定
    Reset リセット
    Sesosa?1 セソサ1
    Sesosa?2 セソサ2

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  10. The following 3 users say "Thanks" to compirate


  11. #7
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Help identifying some components

    Quote Originally Posted by wolfie1299 View Post
    Hey drunken clam! It looks like the first place after the power switch so it seems you’re probably right about power.
    Comes in on the grey wire
    Then it looks like it goes down the black to the left of that board
    That’s the board itself. That lock throws me too, no clue what it’s for.

    Thank you for your time!!
    Not sure why the thread was closed?

    if thats blown. Maybe someone plugged it into a 110v power supply without a tranformer.

    is it this key?

    https://page.auctions.yahoo.co.jp/jp/auction/n312302210
    Last edited by Drunkenclam; 04-25-2020 at 10:27 AM.
    Ian #UKPachinko

  12. #8
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Help identifying some components

    Quote Originally Posted by Drunkenclam View Post
    Yes, that's it.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  13. #9
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Help identifying some components

    My Drive LED is lit. What does that mean?

  14. #10
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: Help identifying some components

    Quote Originally Posted by Drunkenclam View Post
    Not sure why the thread was closed?

    if thats blown. Maybe someone plugged it into a 110v power supply without a tranformer.

    is it this key?

    https://page.auctions.yahoo.co.jp/jp/auction/n312302210
    I’m fairly certain that’s what happened. I have replaced a few of the components and plugs/jacks already. I’m just lost on what the ic chip is and value of the cap that I had originally shown
    Thanks for everyone’s time!!!
    Wolfie1299

  15. #11
    Tokie Owens RForcht's Avatar
    Join Date
    Apr 2020
    Location
    Virginia
    Posts
    24
    Thanks
    15
    Thanks Received
    2

    Default Re: Help identifying some components

    If it was briefly closed because of my questions, please let me know. I thought this was a thread for anyone needed to ID parts could ask. If I hijacked the thread, my apologies.

  16. The following user says "Thanks" to RForcht


Similar Threads

  1. Pachislo + capsule machine, missing reels and other components
    By LuckyCatMuseum in forum Pachislo Modifications
    Replies: 10
    Last Post: 08-07-2020, 12:14 PM
  2. Need help Identifying
    By exbee in forum Modern Pachinko
    Replies: 2
    Last Post: 07-25-2015, 11:53 PM
  3. Need help identifying!
    By Swhitton25 in forum Model Talk
    Replies: 5
    Last Post: 05-17-2014, 11:29 PM
  4. More Help Identifying
    By vairmech in forum Model Talk
    Replies: 7
    Last Post: 10-26-2010, 02:15 AM
  5. Need to identify circut board components
    By pachinkojeff in forum Pachinko Technical Support Tickets
    Replies: 8
    Last Post: 10-06-2010, 04:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •