Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 41

Thread: Pachislo repair

  1. #21
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    IMG_1183.jpgIMG_1216.jpgIMG_1214.jpgthanks for the help. the board was guaranteed to be in working condition from a popular ebay seller. i have found a few wires that were deliberately cut on the wire loom that connects to the top of my reels and then plugs into the main pc board running across the back of the machine. i also found 2 more wires that were cut in a loom that connects at the bottom of the reels and then connects to the reel stop board. i reconnected since they were easily identifiable based on their color markings. but this did not change anything. i did not try reattaching the cut wires in the bigger loom. of the 6 or 7 cut wires there are 3 of them that are black and i'm not sure how to identify which black one goes to which.

  2. #22
    Blind Shooter fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    31
    Thanks
    0
    Thanks Received
    19

    Default Re: Pachislo repair

    Can you see if any of them match the cutting pattern ? Ex: cut on a angle etc..? If you follow the wires to they go to the same connector ?


    Sent from my iPhone using Tapatalk

  3. #23
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    sorry for the bad pics. Uploading them on this site if very difficult and it rotated them. the first pic is a loom of wires from the bottom of the far right reel and connects to the stop board. those wires are color coded and i connected them to their corresponding color and nothing changed. the last 2 pics are much more difficult since 3 of the black wires that are cut i can't get a good read on how or which wires i should connect them back to. does anyone sell this particular loom of wires that connects from the top of the reel to the top of the long pc board that runs across the back of the machine?

  4. #24
    Blind Shooter fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    31
    Thanks
    0
    Thanks Received
    19

    Default Re: Pachislo repair

    If you wish you can send it to me and I can try and put it together for you or send me picture of the front of the machine and I will try to match to mine and see if I can trace them to its correct locations.

  5. #25
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    IMG_1211.jpgIMG_1170.jpgdoes this help any? still cant figure out why the 1st pic is turned 90 degrees to the left.
    Last edited by AJ2; 07-18-2020 at 09:48 PM.

  6. The following user says "Thanks" to AJ2


  7. #26
    Blind Shooter fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    31
    Thanks
    0
    Thanks Received
    19

    Default Re: Pachislo repair

    Just by looking at the connector it appears they are just connected straight through meaning the wire goes from same spot in one connector to same spot on opposite end ?

    I would try that and go from there.

    Color coded should be easy to connect together.

  8. #27
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    not the black ones

  9. #28
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    i meant to say what about the black wires? the color coded ones are simple to decipher. do these cut wires have anything to so with my reels not stopping when i push the stop buttons? i'm new to these machines so im confused why anyone would be inside these machines cutting wires for no reason.

  10. #29
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    5,573
    Thanks
    6,045
    Thanks Received
    3,219

    Default Re: Pachislo repair

    Quote Originally Posted by AJ2 View Post
    IMG_1211.jpgIMG_1170.jpgdoes this help any? still cant figure out why the 1st pic is turned 90 degrees to the left.
    Recommendation:

    Disconnect both ends of the wire harness from the machine and remove the cable tie. Lay the wires flat so you can count out from either end of the connectors the wire positions to pair up the cut wires for reconnecting them.

    This will fix your wire harness but I think your stop button issue relates back to your stop board having a faulty part. If I recall there is the "C10" component that fails.
    Last edited by Peteybob; 07-19-2020 at 12:28 PM.

  11. The following 2 users say "Thanks" to Peteybob


  12. #30
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    what is c10?

  13. #31
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    26,490
    Thanks
    12,422
    Thanks Received
    17,109

    Default Re: Pachislo repair

    Capacitor number 10.
    Ian #UKPachinko

  14. The following 2 users say "Thanks" to Drunkenclam


  15. #32
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    5,573
    Thanks
    6,045
    Thanks Received
    3,219

    Default Re: Pachislo repair

    Quote Originally Posted by AJ2 View Post
    what is c10?
    Quote Originally Posted by Drunkenclam View Post
    Capacitor number 10.
    Have a look at this. This also relates to fuses blowing if you have such a problem.
    https://www.pachitalk.com/forums/sho...oard+capacitor

  16. The following user says "Thanks" to Peteybob


  17. #33
    Blind Shooter fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    31
    Thanks
    0
    Thanks Received
    19

    Default Re: Pachislo repair

    Can you post picture of your stop board close up ?


    Sent from my iPhone using Tapatalk

  18. #34
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    Thanks for your help. I read the post you included about c10. Very informative. My fuse does not blow on either board. Ill follow the questions and check out those other issues. Here is my old board and the new one. The new 0ne is marked new on the front of the pc bIMG_1185.jpgoIMG_1232.jpgarIMG_1240.jpgd.IMG_1236.jpg

  19. The following user says "Thanks" to AJ2


  20. #35
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    i did verify the machine has the same issues with or with out the reel stop board connected.

  21. #36
    Blind Shooter fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    31
    Thanks
    0
    Thanks Received
    19

    Default Re: Pachislo repair

    I would try to reconnect the cut wires like Peteybob suggested

  22. #37
    Tokie Owens AJ2's Avatar
    Join Date
    Jul 2020
    Location
    OK
    Posts
    10
    Thanks
    0
    Thanks Received
    2

    Default Re: Pachislo repair

    Thanks Fastp. i'm going to do that. i was wondering if i measured across the fuse on the reel stop board how many volts should i see? I measured it and got 29 volts DC. is that about right? I was reading on another post they were getting 24 volts ac.

  23. #38
    Blind Shooter fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    31
    Thanks
    0
    Thanks Received
    19

    Default Re: Pachislo repair

    Thatís little high but should be about right. Let me know if anything changes after you reconnect those wires


    Sent from my iPhone using Tapatalk

  24. #39
    Tokie Owens ToxicRhino's Avatar
    Join Date
    Nov 2021
    Location
    SC
    Posts
    15
    Thanks
    9
    Thanks Received
    5

    Default Re: Pachislo repair

    Good morning Fastpcuser, I have some major issues with my reel board and wanted to know if you could help. It has a number AC1293ap3 on it. So the stop buttons stopped working. Board was taken out, looked at and put back in ( INCORRECTLY ) and a chip fried. That’s where it ended months ago.

  25. #40
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    13,721
    Thanks
    25,882
    Thanks Received
    11,692

    Default Re: Pachislo repair

    Quote Originally Posted by ToxicRhino View Post
    Good morning Fastpcuser, I have some major issues with my reel board and wanted to know if you could help. It has a number AC1293ap3 on it. So the stop buttons stopped working. Board was taken out, looked at and put back in ( INCORRECTLY ) and a chip fried. That’s where it ended months ago.
    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  26. The following user says "Thanks" to Moparformances


Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. Replies: 1
    Last Post: 06-16-2019, 04:11 PM
  2. Big chance pachislo spares repair
    By dr2013 in forum Members Trade area
    Replies: 3
    Last Post: 05-11-2013, 02:37 PM
  3. Ebay Auction : Super Black Jack pachislo spares or repair
    By hanabi in forum eBay - General Auction listings
    Replies: 11
    Last Post: 08-28-2012, 01:04 PM
  4. PACHISLO SKILL STOP SLOT MACHINE for repair or parts
    By Sid in forum Pachislo Listings / Ebay RSS feed
    Replies: 0
    Last Post: 03-13-2009, 10:20 PM
  5. Pachislo repair manual
    By rogerpjr in forum Pachislo Modifications
    Replies: 2
    Last Post: 02-05-2005, 07:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •