Results 1 to 6 of 6

Thread: Help Wanted With Pachinko Repair

  1. #1
    Tokie Owens red25's Avatar
    Join Date
    Jan 2020
    Location
    Arizona
    Posts
    1
    Thanks
    0
    Thanks Received
    1

    Default Help Wanted With Pachinko Repair

    Hello.

    I have an old family Sanyo Pachinko machine, but it has been broken for many years.

    I think the problem is that the balls are getting stuck in the back (they do not finish the cycle in the back to the front).

    If anyone lives in the Phoenix, Arizona area who can help me repair my machine, or if you can offer suggestions on how I can fix it myself, I would greatly appreciate it.

    Attached are pictures of the machine (front and back).


    Thank you everyone.


    Pachinko Back.jpg Pachinko Front.jpg

  2. The following user says "Thanks" to red25


  3. #2
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,676
    Thanks
    1,124
    Thanks Received
    1,217

    Default Re: Help Wanted With Pachinko Repair

    Looks like it may be the typical Sanyo sticky ramp below the payout. You will need to disassemble the back to gain access to it.

  4. The following user says "Thanks" to Tink


  5. #3
    Tokie Owens 930's Avatar
    Join Date
    Jan 2020
    Location
    Amarillo, TX
    Posts
    19
    Thanks
    0
    Thanks Received
    16

    Default Re: Help Wanted With Pachinko Repair

    Welcome, you will need to get the stack of balls out of the payout area.
    Attached Images Attached Images

  6. #4
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    13,931
    Thanks
    18,734
    Thanks Received
    9,456

    Default Re: Help Wanted With Pachinko Repair

    time to break out the Q tips and Alcohol for clean up
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  7. #5
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,844
    Thanks
    24,545
    Thanks Received
    11,064

    Default Re: Help Wanted With Pachinko Repair

    Welcome to Pachitalk

    those darn comet II machines are either perfect or sticky / stuck and wont work... lots of cleaning and q-tipping in your future..

    jump in and take lots of pictures as you take it apart.. if it moves on a vintage machine it should move with with little to zero effort..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. #6
    Tokie Owens 930's Avatar
    Join Date
    Jan 2020
    Location
    Amarillo, TX
    Posts
    19
    Thanks
    0
    Thanks Received
    16

    Default Re: Help Wanted With Pachinko Repair

    Lift this wire, it looks like a giant paperclip and the balls will dump out of the shoot.
    Attached Images Attached Images

  9. The following user says "Thanks" to 930


Similar Threads

  1. Looking for Pachinko repair
    By mhardwick76 in forum Modern Pachinko
    Replies: 4
    Last Post: 02-04-2016, 01:05 AM
  2. modern pachinko repair
    By zbakes in forum Pachinko Technical Support Tickets
    Replies: 20
    Last Post: 07-17-2010, 04:35 AM
  3. **WANTED** Speed Racer: GOGOGO Mach CR Pachinko **WANTED**
    By JSpirtos in forum Modern Pachinko
    Replies: 13
    Last Post: 04-06-2008, 11:33 AM
  4. Pachinko Repair's
    By coldluck in forum Pachinko Modifications
    Replies: 20
    Last Post: 11-23-2005, 11:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •