Results 1 to 10 of 10

Thread: Help LCD display issue. Masked rider DX slot not displaying Video

  1. #1
    Tokie Owens Mcduffie21's Avatar
    Join Date
    Jan 2020
    Location
    Providence Rhode Island
    Posts
    4
    Thanks
    2
    Thanks Received
    0

    Default Help LCD display issue. Masked rider DX slot not displaying Video

    Hello all super new to the hobby but I just recently purchased a 2007 DX masked rider slot machine and the display on the LCD is not currently showing any picture itís just displaying a white light any insight or help on this would be greatly appreciated all other aspects of the game or fully functional thanks in advance Mike

  2. #2
    Tokie Owens Mcduffie21's Avatar
    Join Date
    Jan 2020
    Location
    Providence Rhode Island
    Posts
    4
    Thanks
    2
    Thanks Received
    0

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video


  3. #3
    Tokie Owens Ginsnet's Avatar
    Join Date
    Jan 2020
    Location
    Sonoma, CA
    Posts
    9
    Thanks
    5
    Thanks Received
    10

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    I just bought a Rodeo 'My Sky 2006' that has the same problem. unit powers up and the game plays with animation sounds, but just a white screen. I'll be following this thread to see if anyone has troubleshooting suggestions. (fingers crossed)

  4. The following user says "Thanks" to Ginsnet


  5. #4
    Tokie Owens Ginsnet's Avatar
    Join Date
    Jan 2020
    Location
    Sonoma, CA
    Posts
    9
    Thanks
    5
    Thanks Received
    10

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    I figured out how to fix this problem... for mine at least. This may also be what's wrong with yours since my screen looked exactly the same as yours. I had to remove the whole LCD video case, disconnecting all of the connectors. Once you remove the white plastic assembly, remove the 2 screws on either side that hold the metal LCD frame so you can take it out. Remove the back metal cover of the frame by unscrewing the tiny metal screws all around it. Careful when lifting off, there are some ribbon cables you will need to disconnect. Once the metal cover is removed you should see a small black circuit board with a copper colored printed ribbon cable that attaches to the LCD screen. That is the cable that wasn't seated properly for me. You need to lift the tiny black lock on the connector to remove the cable then re-seat it properly. Its a little tricky. That did it for me. Sorry I didn't take pictures but I hope this helps.

  6. The following 5 users say "Thanks" to Ginsnet


  7. #5
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,398
    Thanks
    1,715
    Thanks Received
    3,843

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    Quote Originally Posted by Ginsnet View Post
    Sorry I didn't take pictures but I hope this helps.
    004.jpg

    003.jpg

    005.jpg

    007.jpg

    006.jpg
    Wayne's Game Room

  8. The following 7 users say "Thanks" to Wayne-Ooo


  9. #6
    Tokie Owens Ginsnet's Avatar
    Join Date
    Jan 2020
    Location
    Sonoma, CA
    Posts
    9
    Thanks
    5
    Thanks Received
    10

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    Wayne-Ooo, you are a rockstar! Amazing that you put together a step by step photo instructional. This forum has the best, most responsive, most helpful members of any other forum that I've been a member of.

  10. #7
    Tokie Owens Mcduffie21's Avatar
    Join Date
    Jan 2020
    Location
    Providence Rhode Island
    Posts
    4
    Thanks
    2
    Thanks Received
    0

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    WOW I am super impressed. I am going to try mine out this evening I can't wait Ill let the group know the results thanks Again

  11. #8
    Tokie Owens jjjr1's Avatar
    Join Date
    Feb 2020
    Location
    Texas
    Posts
    2
    Thanks
    0
    Thanks Received
    0

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    Quote Originally Posted by Ginsnet View Post
    I figured out how to fix this problem... for mine at least. This may also be what's wrong with yours since my screen looked exactly the same as yours. I had to remove the whole LCD video case, disconnecting all of the connectors. Once you remove the white plastic assembly, remove the 2 screws on either side that hold the metal LCD frame so you can take it out. Remove the back metal cover of the frame by unscrewing the tiny metal screws all around it. Careful when lifting off, there are some ribbon cables you will need to disconnect. Once the metal cover is removed you should see a small black circuit board with a copper colored printed ribbon cable that attaches to the LCD screen. That is the cable that wasn't seated properly for me. You need to lift the tiny black lock on the connector to remove the cable then re-seat it properly. Its a little tricky. That did it for me. Sorry I didn't take pictures but I hope this helps.

    So this helped so much except I have a problem... whoever owned it before i did CUT THE COPPER CABLE 20200216_041806.jpg20200216_041806.jpg

  12. #9
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,357
    Thanks
    12,862
    Thanks Received
    17,778

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    what an ****. I gues you could try gently unscrewing the back and see if you can get at the other end of the cable.
    Ian #UKPachinko

  13. #10
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,398
    Thanks
    1,715
    Thanks Received
    3,843

    Default Re: Help LCD display issue. Masked rider DX slot not displaying Video

    If you are unable to fix your screen, you may have to purchase a new one.

    Here is a link to a Original TX48D80VM1CAA HITACHI Screen 19.0"1024◊768 TX48D80VM1CAA Display

    Wayne's Game Room

  14. The following 2 users say "Thanks" to Wayne-Ooo


Similar Threads

  1. Neo Planet T El Vision Display Issue Dead Pixels
    By All2TheDough in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 07-14-2019, 03:04 AM
  2. Yamasa Neo Planet T Elvision Monitor Display Issue
    By coyote640 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 06-15-2016, 08:46 PM
  3. thunderbirds just displaying E on credit display
    By carl007 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 05-09-2013, 09:35 AM
  4. Masked Rider Pachinko machine KYORAKU W CUSTOM/ FRAME - $400 san bruno
    By JACKSJE4 in forum FB Marketplace, Craig's List and Other Listings
    Replies: 4
    Last Post: 01-06-2013, 07:12 AM
  5. Video for Knight Rider Pachislo on YouTube
    By Rik1138 in forum Model Talk
    Replies: 0
    Last Post: 06-13-2008, 02:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •