Results 1 to 9 of 9

Thread: Beginner Needing Assistance Finding Key and Solving Error Message

  1. #1
    Tokie Owens themanyouknow's Avatar
    Join Date
    Dec 2019
    Location
    New York, NY
    Posts
    1
    Thanks
    0
    Thanks Received
    0

    Question Beginner Needing Assistance Finding Key and Solving Error Message

    Hello all,

    I picked up a Pachislo Divers slot machine at a town fair a few months ago and am ready to tackle some issues with it. For what it's worth, I'm a pretty handy guy but not experienced with slot machines.

    First and foremost, I do not have a key for this machine. If anyone could help me source one, that would be much appreciated.

    Otherwise, when I plug the machine in I receive the error message "E4". I'm not certain what this means.

    The machine seems to be in good physical condition, but there are many loose coins inside. I can hear them when moving the machine around. I wouldn't be surprised if this was part of the error, but maybe it's just a coincidence.

    Regardless, here are a couple of photos of the machine (front and back).

    Thank you so much in advance, I appreciate any and all advice.

  2. #2
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    Welcome!! For a replacement key, you might need a lock set. Ebay is a good source, keep4safety is a great seller for keys and locks.

    E-4 is a hopper error (somebody check me on this) it could be unplugged or jammed. Once you gain access to the inside (usually a hole on the bottom or in the back that you can go through to trip the latch) check to make sure it's plugged in, and try to rotate it by hand and see if it will spit out tokens. There might be a bent/damaged one binding it up.

    Good luck!!
    Gotta catch 'em all Pa-chink-o

  3. The following 3 users say "Thanks" to Ikaria


  4. #3
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,078
    Thanks
    26,526
    Thanks Received
    12,096

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  5. #4
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    21,299
    Thanks
    26,141
    Thanks Received
    11,963

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  6. #5
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,754
    Thanks
    2,309
    Thanks Received
    5,034

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    Quote Originally Posted by Ikaria View Post
    E-4 is a hopper error (somebody check me on this)
    I believe Divers is a Yamasa brand machine. E-4 error code for some machines is a hopper error, but for Yamasa machines E-4 is a Ram error.
    So, most likely the machine just needs a Hard Reset.

    Here is a list of error codes for Yamasa machines.

    yamasa codes.png
    What if...​the ​HOKEY POKEY, is what it's all about?

  7. The following 5 users say "Thanks" to Wayne-Ooo


  8. #6
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    Cool! Good to have somebody chime in with the correct codes. Hopefully a hard reset does the trick!
    Gotta catch 'em all Pa-chink-o

  9. #7
    Tokie Owens Mcduffie21's Avatar
    Join Date
    Jan 2020
    Location
    Providence Rhode Island
    Posts
    4
    Thanks
    2
    Thanks Received
    0

    Default Re: Beginner needing assistance on LCD display not showing any picture

    Quote Originally Posted by Ikaria View Post
    Cool! Good to have somebody chime in with the correct codes. Hopefully a hard reset does the trick!
    Hello super new to the hobby but I just recently picked up what seems to be a 2007 masked rider machine and I’m getting no display on the back LCD screen any insight or leads would be greatly appreciated the machine is other than that fully functional. The back screen is just completely lit up and wait game please fine thanks Mike

  10. #8
    Tokie Owens Ralphnjr's Avatar
    Join Date
    Apr 2020
    Location
    Dallas, Tx
    Posts
    1
    Thanks
    0
    Thanks Received
    0

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    How do I get a key for my Versus Pachislo machine? Thanks!

  11. #9
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,078
    Thanks
    26,526
    Thanks Received
    12,096

    Default Re: Beginner Needing Assistance Finding Key and Solving Error Message

    Quote Originally Posted by Ralphnjr View Post
    How do I get a key for my Versus Pachislo machine? Thanks!
    post a pic.. e-bay can be your friend..

    and of course

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

Similar Threads

  1. Pachinko beginner CR Sea Story 3R error codes
    By woofdh in forum Pachinko Technical Support Tickets
    Replies: 10
    Last Post: 08-10-2014, 04:59 AM
  2. CE error message
    By Rmasters3 in forum Pachislo Technical Support Tickets
    Replies: 1
    Last Post: 06-10-2009, 04:11 AM
  3. Help With Error Message
    By logo92 in forum Model Talk
    Replies: 5
    Last Post: 01-22-2009, 09:17 AM
  4. EO error message
    By wally in forum Pachislo Modifications
    Replies: 12
    Last Post: 07-07-2006, 09:48 AM
  5. error message
    By lovepickle1 in forum Pachislo Modifications
    Replies: 2
    Last Post: 03-30-2005, 06:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •