Page 1 of 2 1 2 LastLast
Results 1 to 20 of 25

Thread: James Bond 007 paschislo

  1. #1
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default James Bond 007 paschislo

    Picked one up today. It plays ok but when I try to get it to payout the credits it starts flashing a code HJ. Any help would be appreciated. Am looking for a manuel if someone could help. I tryed the search on here but came up blank. Don
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  2. #2
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: James Bond 007 paschislo

    I took out the hopper and found a small screw in the hopper. Put it back together and now I have an HA code. Cannot find what this code means??????
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  3. #3
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,308
    Thanks
    67,899
    Thanks Received
    44,913

    Default Re: James Bond 007 paschislo

    Well HJ can mean hopper jam, but you already figured that out..

    I can't find what a Takasago HA is either..

    The only thing I saw about a 007 with an HA code, the person solved the problem and said
    I got it fixed, their was a token stuck in the coin mechanism, I got it running.
    Does the machine work at all with the HA error??

    "Blowing smoke rings at the moon."

  4. The following 2 users say "Thanks" to MrGneiss


  5. #4
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: James Bond 007 paschislo

    No
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  6. #5
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: James Bond 007 paschislo

    if you do a full reset dose the machine work??
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  7. #6
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: James Bond 007 paschislo

    Well it does not work with any reset. But it does work if I unplug the hopper. Obviously thisis the problem but not sure I want to tear it apart. Will take out the hopper and see if I can see anything jammed.
    Does anybody know if you can spin the hopper with it empty by hand?
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  8. #7
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: James Bond 007 paschislo

    You should be able to manipulate the hopper by hand.. its very possible something is stuck underneath it. I had this happen with a Sankyo machine and there were tokens stuck under the hopper itself. Also try cleaning the sensors on the hopper could be related to that. Some hoppers even have a button you can press which will begin ejecting coins from it to test.. if the hopper has anything in it.

  9. The following 2 users say "Thanks" to stampeed valkyrie


  10. #8
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: James Bond 007 paschislo

    No button to press and it has only one plug to the box.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  11. #9
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: James Bond 007 paschislo

    so if its fine with the hopper unplugged, then the the sensor on the hopper is either blocked or faulty.
    Ian #UKPachinko

  12. The following user says "Thanks" to Drunkenclam


  13. #10
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: James Bond 007 paschislo

    So that being said, where is the sensor and how do you fix it or can you order one. You are a little over my skill level for this type of machine.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  14. #11
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: James Bond 007 paschislo

    Quote Originally Posted by Lt Teddy View Post
    So that being said, where is the sensor and how do you fix it or can you order one. You are a little over my skill level for this type of machine.
    No idea how to answer without any pictures..
    Post up some images of the hopper, (above, below, side.. etc) shots so we can see what it looks like. Taking these apart is not Rocket Science by a long shot... usually.. lol

  15. #12
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: James Bond 007 paschislo

    https://www.ebay.com/itm/Pachislo-Sl...YAAOSwuxFY0cs2

    Is that it?

    I am going by pictures on pachislodb.com found here.
    https://www.pachislodb.com/db-JAMES+BOND+007.html

  16. The following user says "Thanks" to stampeed valkyrie


  17. #13
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: James Bond 007 paschislo

    Yes that is the exact hopper.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  18. #14
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: James Bond 007 paschislo

    ... well worst case scenario you could buy a replacement hopper.

  19. #15
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: James Bond 007 paschislo

    Also take your hopper out and check the little flappy lever that breaks the light beam when a token comes out.
    Ian #UKPachinko

  20. The following 2 users say "Thanks" to Drunkenclam


  21. #16
    Tokie Owens cosmicdust's Avatar
    Join Date
    Jun 2018
    Location
    Merseyside
    Posts
    7
    Thanks
    1
    Thanks Received
    9

    Default Re: James Bond 007 paschislo

    I too have this machine, and it wont payout, always gives me HE hopper error. I have taken the hopper out, emptied it, cleaned the sensor and still get HE error, I am t a loss, any ideas? I get this error regardless if the hopper is connected or not. The machine works fine, the error only occurs when it has to pay out. Its a Takasago ch-650 hopper
    Last edited by cosmicdust; 06-10-2018 at 05:34 PM.

  22. #17
    Tokie Owens cosmicdust's Avatar
    Join Date
    Jun 2018
    Location
    Merseyside
    Posts
    7
    Thanks
    1
    Thanks Received
    9

    Default Re: James Bond 007 paschislo

    Where is this lever located, I dont see on in mine?
    Quote Originally Posted by Drunkenclam View Post
    Also take your hopper out and check the little flappy lever that breaks the light beam when a token comes out.
    Last edited by cosmicdust; 06-10-2018 at 05:36 PM.

  23. #18
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: James Bond 007 paschislo

    Not a clue, Its just a generic item on most hoppers. Its normally on the under side.

    But maybe your issue is different.

    LT's goes straight to error. You say yours does't payout and goes into error.

    So when it goes to pay out, does it spit tokens out first then go into error. Or just go straight to error
    If the first, then there is a fault with the sensor that counts the payout.
    If the second, the motor isn't turning to pay out. Then try turning the disc in the bottom by hand and see if it spins ok. You can try it with one or two tokens in, but be warned they fly out with some force.
    If it turns ok, then try connecting the payout motor to a voltage source (I use a car battery due to the strong current)
    If the motor turns ok, then you have a fault with one of the circuit boards.
    Ian #UKPachinko

  24. The following user says "Thanks" to Drunkenclam


  25. #19
    Tokie Owens cosmicdust's Avatar
    Join Date
    Jun 2018
    Location
    Merseyside
    Posts
    7
    Thanks
    1
    Thanks Received
    9

    Default Re: James Bond 007 paschislo

    Yes just goes straight to error. I have turned the disc by has and no problems and it does spit out the tokens when doing so manually. I will try hooking it up to a car battery tomorrow and see if the motor works - will it wok off 12 volts? I hope its not the circuit board.

    Thanks for the advice


    Quote Originally Posted by Drunkenclam View Post
    Not a clue, Its just a generic item on most hoppers. Its normally on the under side.

    But maybe your issue is different.

    LT's goes straight to error. You say yours does't payout and goes into error.

    So when it goes to pay out, does it spit tokens out first then go into error. Or just go straight to error
    If the first, then there is a fault with the sensor that counts the payout.
    If the second, the motor isn't turning to pay out. Then try turning the disc in the bottom by hand and see if it spins ok. You can try it with one or two tokens in, but be warned they fly out with some force.
    If it turns ok, then try connecting the payout motor to a voltage source (I use a car battery due to the strong current)
    If the motor turns ok, then you have a fault with one of the circuit boards.

  26. #20
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: James Bond 007 paschislo

    Lets just be 100%

    it goes to error when you turn it on, or It goes into error when its time to payout?
    Ian #UKPachinko

  27. The following user says "Thanks" to Drunkenclam


Page 1 of 2 1 2 LastLast

Similar Threads

  1. hopper for james bond 007?
    By wrobotronic in forum Pachislo Technical Support Tickets
    Replies: 6
    Last Post: 03-25-2013, 08:52 PM
  2. Tribute to J.W. Pepper, Clifton James. James Bond and the defunct AMC motors
    By Microbus99 in forum These are the days of our lives...
    Replies: 4
    Last Post: 06-04-2011, 09:43 PM
  3. James Bond?
    By PachiAddict in forum eBay - General Auction listings
    Replies: 12
    Last Post: 07-20-2005, 12:02 AM
  4. 007 James Bond
    By Davis in forum eBay - General Auction listings
    Replies: 21
    Last Post: 06-29-2005, 01:03 PM
  5. James Bond....
    By Davis in forum eBay - General Auction listings
    Replies: 0
    Last Post: 03-17-2005, 10:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •