Needed 10 Way Battle Counter Connector and Pin Out for Heiwa Hotaru Frame

[Cris]

Hello!

Spent far too long on Google looking for any information on this thing! Can't find a scrap.

I'd like to add a Battle Counter to my Pretty Band Pachinko.

Just the small detail of identifying the pin out and locating the correct connector for the plug. 2 images attached show the connector and the plug I am looking for.

Having no luck at all on any place I look for this. Can anyone help?

It's a 10 way connector (unsure if I need the 2 way next to it?) and there are other connections the same all over the back of the machine, so maybe someone has a junker I would take one from?

Any help would be greatly appreciated.

Cheers

Cris

IMG_6203.jpgIMG_6201.jpg

[Drunkenclam]

post or email me clear pics of the whole back, including any information keys I have loads of different connectors. maybe be colour coded or just text

[Drunkenclam]

I found this

http://item.rakuten.co.jp/slot/4683/

But you should have some where a list of all the outputs

[Cris]

Yes, I spotted this when searching myself.

I am only using Google for the translation so maybe I am getting it wrong, but the picture shows a 12 way 2 row connector, where as the one I need is a 10 way one row. So maybe this is for a later model than mine?

I think I'm going to try and strip out the cell to see if the connection key is printed behind the frame structure where I can't see it at the moment.

This like it might be what I'm after, I found it on Google images for a Battle Counter tutorial, but the only info is to buy it from Yahoo Japan, no description...

Cable_connector.jpg

Cheers

Cris

[Drunkenclam]

your best bet is to just do a continuity check on the pins, during spins and ootari.

[Cris]

IMG_6204.jpg

Durr, in massive letter in the middle of the machine !!! Man I feel stupid.

Still need to find the right connecting lead though.

Cheers

Cris

[Drunkenclam]

I think.

Out 1 start pocket
Out 2 Ootari - Jackpot
Out 4 high probability mode

why out 6 (大たり0) is a voltage output and not a switch