Results 1 to 4 of 4

Thread: How does a cabinent attact to the machine?

  1. #1
    Tokie Owens Bakushan's Avatar
    Join Date
    Sep 2015
    Location
    Rockwall, Texas
    Posts
    30
    Thanks
    10
    Thanks Received
    23

    Default How does a cabinent attact to the machine?

    Hello all,

    I have a modern machine "Gundam Red Fever" and I am wanting to create a cabinet for it. I am wondering how you attach the machine to a cabinet once you build a wooden frame for it?

  2. #2
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: How does a cabinent attact to the machine?

    Any way you want. Normally held in place on the top and bottom. Can screw or bolt it though the cabinet, or get some strong clamps.

    My cabinets have 8mm threaded insets in them. Then holes drilled through the timber in the top and bottom of the pachi frame. Then I bolt each machine in using 8mm coach bolts in the top because of the shallow head, 8mm bolts in the bottom. I made a drill template. So I can change and fit new machines in the existing cabinet easierly.

  3. #3
    Tokie Owens Bakushan's Avatar
    Join Date
    Sep 2015
    Location
    Rockwall, Texas
    Posts
    30
    Thanks
    10
    Thanks Received
    23

    Default Re: How does a cabinent attact to the machine?

    I see that the top of my exposed machine is a nice piece of wood... there are no large holes in it. There are a few small screw holes on either end, I do not know why.

    I have never seen under the bottom as the machine is very heavy.

    I am trying to figure it all out, lol..

  4. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: How does a cabinent attact to the machine?

    i have always attached mine with wood screws..

    threw the cabinet into the machine.. make sure the screws are long enough but at the same time not to long..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

Similar Threads

  1. Star Wars & "attact mode"
    By Darth Nuno in forum Modern Pachinko
    Replies: 3
    Last Post: 02-12-2006, 11:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •