Yamasa Sea Story

[Rellik70]

I'm new to this site i have a question i just got the yamasa sea story played with it for a little bit everything looks fine but it won't let me play anymore trying to rest still not working no errors show but the coin slot is blinking red also my slot doesn't take coins i need help if you can thanks

[hanabi]

I'm new to this site i have a question i just got the yamasa sea story played with it for a little bit everything looks fine but it won't let me play anymore trying to rest still not working no errors show but the coin slot is blinking red also my slot doesn't take coins i need help if you can thanks

welcome aboard

I think yours is a Pachislo (Japanese slot machine takes tokens?) rather than a Pachinko?

So have moved here to the pachislo tech support for you

[Moparformances]

doing a full reset never hurts

and of course

Welcome to Pachitalk


In order to do a full rest or change odds, machine must be in idle mode with no tokens or credits being played.

Locate internal toggle switch (red tipped or silver with on/off tabs) or insert key into internal key switch (if your machine came with 2 keys).

Machine must be turned OFF. Turn key clockwise or flip reset toggle switch to the "ON" or "ODDS" position. Turn main power switch ON to access programming mode.

A number from 1 to 6 will be displayed on the CREDIT meter on the front door or on a display inside the door.

Locate the reset button. This will be located on your power supply. On SAMMY brand models, the button is on the inside of the door only.

Depress the button and notice movement of number being displayed on the credit meter. Once the desired level is displayed (1 to 6) pull "spin reels" handle (black or red knob on front door) down, like you are going to spin the reels, to lock odds level into machine memory.

Turn key switch back or flip toggle to "OFF" or "PLAY" position. Machine should immediately initialize. You will know the machine initialized if the "Insert Medal" light starts flashing. If not, make sure you remembered to press down the "SPIN REELS" lever. If it still doesn't initialize, turn power to the OFF position, wait 15 seconds and turn power switch back to ON position.