Looking for Nishijin Pockets *WTB*

[Phulkrum]

started pulling parts off of my new project and discovered that the previous owner attempted cleaning with something acidic (most likely CLR) and it has damaged all of the nails and made some of the plastics brittle. needless to say I'm searching for replacement pockets as shown here...

Screen Shot 2015-01-22 at 8.42.30 AM.png

send me a PM if you have any available..

Thx..

[bonsaimaster1]

Good luck finding those, i wouldn't even know where to start looking. If i see any i will let you know! Most-likely, you will have to scavenge those parts from another machine... Anyways, I'll be on the lookout for ya!

[mxfaiman]

Is that the model that has the nails go all the way through or the one with the just little tabs at the bottom for small nails?

[Phulkrum]

all the way through..@mxfaiman

[Moparformances]

i have a pair of blue round pockets.. Interested??

P1090954.jpgP1090953.jpg

Kinda sorta not even close

[Phulkrum]

@ moparformances , I'm not going to say no because it's always wise to have a back up plan. 😉. I'm trying out the bondic I mentioned a few weeks ago to piece the shattered orange one back together. So far so good but a large chunk is inside the mechanics right now so I can't bond the remaining piece of the 5 back to the main piece until then. None the less send me a pm with what your asking for them and we will make arrangements.
Thank YA kindly sir.


Sent from my iPhone using Tapatalk

[Moparformances]

@ moparformances , I'm not going to say no because it's always wise to have a back up plan. . I'm trying out the bondic I mentioned a few weeks ago to piece the shattered orange one back together. So far so good but a large chunk is inside the mechanics right now so I can't bond the remaining piece of the 5 back to the main piece until then. None the less send me a pm with what your asking for them and we will make arrangements.
Thank YA kindly sir.


Sent from my iPhone using Tapatalk

hoping to get 20 each for them is that fair???

[bonsaimaster1]

That was nice of you Mopar to offer that to Phulkrum! Just wondering though, what machine did you get those from, the pocket on the left looks pretty neat!!!

[emmadog]

40 bucks for just those two pockets???

[Moparformances]

That was nice of you Mopar to offer that to Phulkrum! Just wondering though, what machine did you get those from, the pocket on the left looks pretty neat!!!

there a pair.. the one on the left is the same as the one on the right?

[Moparformances]

40 bucks for just those two pockets???

its an asking price.. he asked, i answered... is that not a fair starting point??

[emmadog]

i'd stick those two in a padded mailer and send them for free in the spirit of just helping someone out since they're just two small pockets that may sit around and never be used otherwise.
if you have to get paid I'd ask 10 bucks tops and that includes shipping.

[Moparformances]

i'd stick those two in a padded mailer and send them for free in the spirit of just helping someone out since they're just two small pockets that may sit around and never be used otherwise.
if you have to get paid I'd ask 10 bucks tops and that includes shipping.

its a joke... all i asked for was a few bucks to cover the shipping... i wont put them in other then a box.. i would hate for the po to squish them in an envelope

[emmadog]

Rog.

[ANGRY GARY]

i think i have a pair around here. say $10 and i will ship them. i can send a picture this evening if interested. mine are either orange or red, can't remember

AG

[Chumsize]

I've been itching to print some pockets on the ol' 3d printer...