New to Pachislo... need a replacement board
Hi,
The machine in question is an "ORE NO SORA" (2006).
A buddy gave me a non-working machine as he was pulling out of his driveway moving six states away. It lights up but that's about it. He said that at one point the game worked fine for years and stopped working (it was "throwing a code"). He said he found a phone number of a tech where told him he needed a new board..but he got the wrong board. Unfortunately, I don't have the original board to get a part number off.
I'm pretty sure I know which board is in question as there's a board with a connection not hooked to anything as well as a wire/connector not plugged into a board. It's the Input Control Board.
The connector cable for CN3 does not match the pins on the board. The connector cable expects eight pins, however the bad board only has seven pins.
The incorrect board code has "CMK SM05BDC63" on it.
The guys on Pachislodb gave me a great start. They identified the machine by some photos. Furthermore someone (Wayne-O) with the same machine said his Input Control Board is part# SM05BDC51. The suggestion was to call John at Stealth Home Amusements. I talked to John yesterday...he does not have a replacement. He suggested the fine folks at PachiTalk may be able to help locate a replacement board.
This is all very new to me. I'm a pinball guy...but don't hold that against me
I'd be glad to include any photos, but at this point I'm not sure what you would want to see.
TIA,
Rich
Reply With Quote
Welcome to pachitalk! I'm a vintage pachinko guy...so I can't help. Hopefully someone has a parts machine with what you need!
... 
