Results 1 to 6 of 6

Thread: Power Up Issues

  1. #1
    Tokie Owens grimor's Avatar
    Join Date
    May 2014
    Location
    Chicago-ish
    Posts
    3
    Thanks
    0
    Thanks Received
    0

    Default Power Up Issues

    I have a Juggler Pachislo machine that has some problems in the power up process.
    IMG_20140508_184748_120.jpg

    When I first purchased the machine, it worked fine but started doing more or less the same thing it is doing now. (see video) The place I purchased it from sent out a new power supply and it fixed the problem briefly. I've had it more or less in storage for years. I saw a juggler power supply on ebay and i guess they aren't all the same, not even close to the same connectors. Just motivated to get it going, I got rid of all my video pachislo, this has always been my fav so I kept it.

    In the video, you can see powering on without the light board connected, then connected, and disconnected again.

    Having the bin connected doesn't seem to impact the operation either way (it's disconnected in the video)

  2. #2
    Tokie Owens Kaasie's Avatar
    Join Date
    Jan 2012
    Location
    NL
    Posts
    10
    Thanks
    2
    Thanks Received
    0

    Default Re: Power Up Issues

    A hard reset does not make any difference right? Or do you not have the reset/settings key?

  3. #3
    Tokie Owens grimor's Avatar
    Join Date
    May 2014
    Location
    Chicago-ish
    Posts
    3
    Thanks
    0
    Thanks Received
    0

    Default Re: Power Up Issues

    Quote Originally Posted by Kaasie View Post
    A hard reset does not make any difference right? Or do you not have the reset/settings key?
    I have a key, wasn't entirely sure what the procedure was for a heard reset. Found instructions here..
    e-slot.com Pachislo Owner's Manual - Reset Procedures

    I'll try it the next time I have the machine open and I'll post the results.

  4. #4
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,340
    Thanks
    51,525
    Thanks Received
    30,715

    Default Re: Power Up Issues



    Here are the usual PachiTalk instructions:

    Most errors are usually remedied with a full reset, so just to double check that you are carrying out the complete hard reset

    Here is some info that explains how to reset a pachislo, as part of this process it includes how to change and set the skill level, you must follow all steps carefully


    "How To Set the Skill Levels of Your Pachislo
    HOW CHANGE ODDS:

    "TURN YOUR MACHINE OFF FIRST"

    1. Locate internal key switch, and insert key.
    Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

    2. Turn "reset" key switch to on, to access programming mode.

    3. Turn on machine now.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door. (please note on some models the numbers could be displayed inside the machine)

    5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

    6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

    7. Turn "reset" key back to off.

    8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.


    Also just to confirm some additional info (from member Chrisdice) regarding hard reset

    Two switches on the power supply:
    - One requires a soft reset at the end of a bonus.
    - The other pays out all tokens at the end of a bonus.

    For these switches in most cases off is in the down or right position. The for off and on are:

    無 = off

    有 = on





    and Welcome to PachiTalk!!
    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  5. #5
    Tokie Owens grimor's Avatar
    Join Date
    May 2014
    Location
    Chicago-ish
    Posts
    3
    Thanks
    0
    Thanks Received
    0

    Default Re: Power Up Issues

    I didn't find a skill button, my number just stays at 1.

    The machine is still acting very weird. If I let it sit and power it on, it behaves the way in the video. If I disconnect the top lights and the florescent light board then it will let me do a reset, then I have to do a switch off, plug in top lights, switch on, switch off, plug in florescent light board, turn on in reset mode and then turn the key back to off and it will work fine.

    Turning it off and letting it sit for 10 min, and I have to repeat the weird power on process. It needs cleaned, about every 10th token I put in it starts to alarm like I was beating it or something and has to be reset again to make it shutup.

  6. #6
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: Power Up Issues

    the skill button could either be on the power supply or on the inside of the door. its usually very small and red
    幸運わんわん Luckydog or Yukiwanwan in Japanese

Similar Threads

  1. cr code issues
    By mklemin in forum Pachislo Technical Support Tickets
    Replies: 7
    Last Post: 03-05-2012, 11:11 PM
  2. How to Power a Power Flash / Circuit Racer Machine
    By Moparformances in forum Vintage Pachinko
    Replies: 2
    Last Post: 06-19-2011, 08:53 PM
  3. Power Flush power flash
    By who922 in forum Vintage Pachinko
    Replies: 21
    Last Post: 07-12-2010, 11:12 PM
  4. power to a power flash question
    By Moparformances in forum Vintage Pachinko
    Replies: 2
    Last Post: 11-11-2009, 11:25 AM
  5. New User - Issues
    By Sid in forum Frequently Asked Questions about the Site
    Replies: 0
    Last Post: 07-20-2009, 05:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •