Sankyo modern machine- bank of lights not illuminating

[ANGRY GARY]

My sankyo "fool" machine has a bank of lights that are not illuminating. The lights are all ones that light up through the door and shine through panels of colored plastic. I found three fuses, 1,4 and 7 amp fuses. All are good. The set of lights are attached to boardE6CN. There are 5 plugs going out to lights. E6CN-6 is the input plug to the circuit board. I am unable to find the E6CN connector on the back of the machine.




What is my next thing to check.

AG

[CarlW]

I'm not familiar with your machine. Is it a Lumina frame? I had to replace some of my Lumina frame bulbs...

[ANGRY GARY]

DSC01431.jpgDSC01432.jpgDSC01433.jpghere are a couple pictures. i hope this helps some

[ANGRY GARY]

is it possible that these only come on during a fever? everything on this machines works fine.

[hanabi]

I'm not familiar with your machine. Is it a Lumina frame? I had to replace some of my Lumina frame bulbs...

Looks like this is an earlier frame, from 2002 predating Lumina and Victory frames

Google Translate

help with ID'ing this machine

is it possible that these only come on during a fever? everything on this machines works fine.

It's possible

I don't have this model so can't check for you

But you could try manually dropping balls into the start pocket to see what happens when it hits a FEVER

[ANGRY GARY]

ten minutes after my last post i hit somekind of jackpot and they all lit up! thank you and i will close this ticket