Cannot Find Volume Control Welcome to Las Vegas Pachislo machine

[Astaus]

Hello, I am new to the group and am facing a similar but different problem, my machine is the same as yours but the screen has been removed and I have no sound! Did you ever take a look and see if your screen is connected? If it is then perhaps I need a screen to get the sound to work as well, if not then I have to find the problem. Thank you!

[Moparformances]

Hello, I am new to the group and am facing a similar but different problem, my machine is the same as yours but the screen has been removed and I have no sound! Did you ever take a look and see if your screen is connected? If it is then perhaps I need a screen to get the sound to work as well, if not then I have to find the problem. Thank you!

pics inside and out would help

and of course

Welcome to Pachitalk

[Card Shark]

Before removing the sticker I would check to see that screen is still there and connected. I would also see if there is a way to see if it is working maybe from behind without removing the sticker.

[Wayne-Ooo]

If the sticker is on the outside of the machine and can be peeled back, then yes. My guess is that it is mounted inside the frame. So, you would have to remove the unit inside the machine to get to it. The unit I'm referring to is the one that we talked about earlier where the factory volume controls located. On the other side of that circuit board is the LCD screen and access to the frame that is holding in the sticker.

I know it sounds "Scary" taking the machine apart. But really it's just unplugging connections and taking out screws.

[Moparformances]

Welcome to Pachitalk

[barbiefreak]

Another question when disconnecting one or two of the speakers. Do I just pull the wires out of the connection?

[Wayne-Ooo]

Another question when disconnecting one or two of the speakers. Do I just pull the wires out of the connection?

Yes, Follow the wires from the speakers to the circuit board that they connect to. My guess would be that they connect to the circuit board that is above the "reel glass". (The circuit board that has the factory volume control.)

[barbiefreak]

Thank you Mopar!!

[barbiefreak]

Ok I changed the ease of win from a 2 which is what it was set on when I got the machine to a 6 but to me doesnt seem to be paying off any better. Then I changed it to a 1 and it seemed to pay a little (not much) better set on 1. I will try to disconnect a couple of the speakers. Yes it looks very scarey inside this machine. We also got a vintage pinball machine and it looks scarey inside and behind but someone is teaching me the "how to's" on that machine also. Im really happy I found this forum!!

[Card Shark]

We are happy you joined.

A word of warning though, these machines tend to multiply very quickly.

[barbiefreak]

LOL I will need a bigger basement!

[barbiefreak]

I guess I have to take the clear cover off to disconnect a couple of the speakers. How do I safely take the clear cover off?

[barbiefreak]

NM just disconnected from the speaker itself duh. lol

[Card Shark]

Have you ordered volume controls yet?

[barbiefreak]

Not yet I did disconnect 3 of the speakers and its alot better. Which of the 2 ebay auctions do you recommend. I was going to try the first as no soldering required.

[Card Shark]

The ones with no soldering are what I use on all my machines. Extremely easy to install.

Remember you will need one per speaker.

[barbiefreak]

Going to get those. Thanks and have a great weekend

[barbiefreak]

I dont think the ease of win is working because I dont notice machine paying out any better on a 6 than it does on a 1. Can that be fixed?

[hanabi]

I dont think the ease of win is working because I dont notice machine paying out any better on a 6 than it does on a 1. Can that be fixed?

Hello

Welcome to PachiTalk!!

I think maybe you need to be playing it a bit more?, put a LOT of tokens through it and I'm sure you'll start to see some bonus payouts

remember these machines are designed to be used constantly in a games parlour environment, and they will often go through dry spells and then all of a sudden you may have a frenzy of payouts and repeats

[Moparformances]

give it time it will barf out tokens soon enought for ya