Results 1 to 11 of 11

Thread: My first Pachinko modern + humble request for advice

  1. #1
    Tokie Owens moomoocow's Avatar
    Join Date
    Apr 2013
    Location
    FLorida
    Posts
    4
    Thanks
    3
    Thanks Received
    7

    Default My first Pachinko (modern) + humble request for advice

    Hello fellow Pachinko players,

    I recently (yesterday)purchased a Pachinko machine. It is a modern machine (with a knob auto-launcher that works. I quite like it. Pictures are at https://picasaweb.google.com/sugata....CJv2mPW-wOCkJQ

    If anyone knows anything about this machine, I would be most curious to find out.

    The machine works OK, except it has a couple of problems:

    1. Once a jackpot is hit, there is no payout - If I look at the back, I can see the payout balls tray pretty full, but something is stopping them from being released.
    2. A number of parts do not light - the tulips do not open the payout slot above the jackpot does not open - I suspect something wrong with a an electrical connection or maybe a blown fuse.
    3. There is a third big repository of balls in the back which seem jammed. This is in between the payout tray on top and the drain tray at the bottom. I can't figure out where these balls are from/how to release them. It seems they should go into the drain tray, but something is jamming their release.

    Any help is much appreciated. Thank you in advance.

    SR

  2. The following 3 users say "Thanks" to moomoocow


  3. #2
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,478
    Thanks
    51,687
    Thanks Received
    30,772

    Default Re: My first Pachinko (modern) + humble request for advice

    Hi there

    Unfortunately your link is not working for me,

    are you able to upload a couple of pics to this thread, so our members can see them?

    This link explains if you are unsure how to do that:

    How to Post Pictures!!

    In the meantime, Welcome to PachiTalk!!

    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  4. The following user says "Thanks" to hanabi


  5. #3
    Tokie Owens moomoocow's Avatar
    Join Date
    Apr 2013
    Location
    FLorida
    Posts
    4
    Thanks
    3
    Thanks Received
    7

    Default Re: My first Pachinko (modern) + humble request for advice

    OK - here is another link https://picasaweb.google.com/1103727...85679/Pachinko

    I made it public - it should work. Sorry about that. Thanks again for reading the post.

  6. The following 2 users say "Thanks" to moomoocow


  7. #4
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,478
    Thanks
    51,687
    Thanks Received
    30,772

    Default Re: My first Pachinko (modern) + humble request for advice



    okay here are a few pics from the link, for those members unable to follow outside links:

    2.JPG1.JPG3.JPG4.jpg5.JPG
    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  8. The following 4 users say "Thanks" to hanabi


  9. #5
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,958
    Thanks
    13,706
    Thanks Received
    19,269

    Default Re: My first Pachinko (modern) + humble request for advice

    The clam is mobile at the moment so can't access my database. But here's my theory. You ball jam in the middle is the back log of balls that have gone into the start pocket. Once you get the system to payout that (should clear its self) Monako machine has a small level you can flick up and down manually to clear each ball one by one.

    First thing is to make sure the balls are making it all the way to the payout motor. Follow all the balls down from the top tank and all the way to the motor. It's amazing what can block it. Bits of paper, screws, wrong sized balls.
    Ian #UKPachinko

  10. The following 3 users say "Thanks" to Drunkenclam


  11. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,958
    Thanks
    13,706
    Thanks Received
    19,269

    Default Re: My first Pachinko (modern) + humble request for advice

    Any pachi that has a bunnygirl on it does it for me

    Anyhow

    The machine is called Pinball (ピンボール) by Kyoraku (京楽) from 1993 according to the video below


    Heres a video to one working to give you an idea on the lights
    ピンボール (京楽) - YouTube


    As for whats wrong. I don't have anything in thsi frame so I can't really be very hellpful, Just some generic tests.
    First is to dump the balls out of the top tank, remembering to have something to catch them in. Then remove the plastic down to the payout motor and see whats there. Locate the motor and see if anything is jammed in it.
    Take pictures for reference as you go and start taking the covers off. Good luck


    I see a socket in the back with nothing in it? I hope you aren't missing a wire
    Ian #UKPachinko

  12. The following 4 users say "Thanks" to Drunkenclam


  13. #7
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,092
    Thanks
    26,546
    Thanks Received
    12,131

    Default Re: My first Pachinko (modern) + humble request for advice

    your pic 12 is where the winning balls are registared for a payout... If i rember right when that machine is pluged in the payout motor turns full time... if your payout motor is not turing that could be a problem...
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  14. #8
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,092
    Thanks
    26,546
    Thanks Received
    12,131

    Default Re: My first Pachinko (modern) + humble request for advice

    and of course

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  15. #9
    Eye Shooter Chumsize's Avatar
    Join Date
    Aug 2012
    Location
    Gilroy, CA
    Posts
    887
    Thanks
    516
    Thanks Received
    1,785

    Default Re: My first Pachinko (modern) + humble request for advice

    Welcome! Cool machine!

    yeah... Looks like you have a massive ball jam in the "lower intestine" there...

    wherever that leads is what's supposed to kickoff a payout. Find out why that's not working or is jammed, I'd say.
    Woof!

  16. #10
    Tokie Owens moomoocow's Avatar
    Join Date
    Apr 2013
    Location
    FLorida
    Posts
    4
    Thanks
    3
    Thanks Received
    7

    Default Re: My first Pachinko (modern) + humble request for advice

    OK - thank you all for your extremely useful replies. I will spend some time tomorrow looking through this lower intestines. I think there is a problem with the motor - but more than that, after seeing the video, a bunch of the lights don't light up - so it could be a fuse that's shorting out a chunk of the machine. It'll be a nice little project for the next few weeks. I'll keep you all in the loop as I progress... In any case, I just want the machine playable so as long as the payout is running I'll be happy!

  17. The following 2 users say "Thanks" to moomoocow


  18. #11
    Tokie Owens moomoocow's Avatar
    Join Date
    Apr 2013
    Location
    FLorida
    Posts
    4
    Thanks
    3
    Thanks Received
    7

    Default Re: My first Pachinko (modern) + humble request for advice

    Update: So I fixed part of what's going on (or at least understand how to fix it, the fix I'm implementing is not quite 100%). The white and beige motorized ball releaser (lower right and on the back, covered by a gray plastic cover) was jamming - I removed it, lubed it up and the jam rate has gone done significantly. The way it releases balls into the back "lost balls" drain tray is it flips this two white levers up, one at a time, releasing the balls - I somehow, in the process, got my first winning payout - anyway - the main thing remaining is that about half the lights/stuff do not work currently - this could be a blown fuse/missing wire/something else. Fortunately, the machine remains playable, since the ball shooter and the main payout pocket are still active - it would be nice to get the other payout pockets active. Incidentally, removing the fuse right in the middle of the machine does not affect anything, so whatever is missing involves that line. I don't think that fuse is blown, since it looks intact - but, what do I know... it's my first machine. I'll post a couple of videos later this week - again, I humbly request advice, especially re. fuses/missing wires.

    Thank you all again.

Similar Threads

  1. Replies: 25
    Last Post: 01-16-2012, 10:29 PM
  2. Need advice on pachinko purchase
    By Alzarakh in forum Modern Pachinko
    Replies: 11
    Last Post: 01-24-2011, 07:50 PM
  3. First Pachinko a little advice
    By mcdeez in forum Modern Pachinko
    Replies: 10
    Last Post: 05-30-2009, 12:40 AM
  4. Any advice? Regarding Purchase of Vintage Pachinko.
    By ruckage in forum Vintage Pachinko
    Replies: 8
    Last Post: 10-16-2008, 02:01 AM
  5. Need advice on new pachinko
    By eastside in forum Modern Pachinko
    Replies: 6
    Last Post: 02-13-2008, 06:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •