Results 1 to 10 of 10

Thread: E-6 error on DON DON KING machine by Daido

  1. #1
    Tokie Owens Pepperdanky's Avatar
    Join Date
    Sep 2012
    Location
    Delhi, New York
    Posts
    5
    Thanks
    1
    Thanks Received
    7

    Default E-6 error on DON DON KING machine by Daido

    Hey all, First off I am relatively new to the whole pachislo scene and am having some issues with my new machine. I just purchased the Don Don King machine by Daido and am getting the E-6 error on my game count display in the front. I have read through many forums and tried the soft resets as well as the hard resets and the hard reset works but then when I put in the 3 tokens to play and spin the reels 2 of the reels sort of spin and get stuck a little here and there (3rd reel spins fine) and then after a few seconds the E-6 error returns.(i also can't stop the reels by hitting the buttons before it errors) I have also tried taking the hopper out and making sure it had no coin jams and checked to make sure the hopper shot coins out. Everything seems to be working properly.(aside from the error of coarse) Any help would be much appreciated and thank you for your time.

  2. #2
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: E-6 error on DON DON KING machine by Daido

    Welcome to Pachitalk!

    I am sure someone will be by shortly with some ideas for you. It always helps when you post some pictures. Inside and out.

    Good Luck
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  3. #3
    Eye Shooter rockston's Avatar
    Join Date
    Apr 2012
    Location
    Chicago
    Posts
    550
    Thanks
    662
    Thanks Received
    883

    Default Re: E-6 error on DON DON KING machine by Daido

    Hi, after you spin, without pressing any stop buttons, how long does it take to error ? What are the reels doing during this?

  4. #4
    Tokie Owens Pepperdanky's Avatar
    Join Date
    Sep 2012
    Location
    Delhi, New York
    Posts
    5
    Thanks
    1
    Thanks Received
    7

    Default Re: E-6 error on DON DON KING machine by Daido

    GEDC2508.jpgGEDC2509.jpgGEDC2510.jpgGEDC2512.jpg
    Here are a few images of my machine...will work on uploading a video next

  5. The following 2 users say "Thanks" to Pepperdanky


  6. #5
    Tokie Owens Pepperdanky's Avatar
    Join Date
    Sep 2012
    Location
    Delhi, New York
    Posts
    5
    Thanks
    1
    Thanks Received
    7

    Default Re: E-6 error on DON DON KING machine by Daido

    After I spin it only takes about 5 seconds before the error comes up and during this the reels are spinning.

  7. #6
    Tokie Owens Pepperdanky's Avatar
    Join Date
    Sep 2012
    Location
    Delhi, New York
    Posts
    5
    Thanks
    1
    Thanks Received
    7

    Default Re: E-6 error on DON DON KING machine by Daido



    This is a video of my machine after hard reset.

  8. The following 3 users say "Thanks" to Pepperdanky


  9. #7
    Eye Shooter rockston's Avatar
    Join Date
    Apr 2012
    Location
    Chicago
    Posts
    550
    Thanks
    662
    Thanks Received
    883

    Default Re: E-6 error on DON DON KING machine by Daido

    Quote Originally Posted by Pepperdanky View Post


    This is a video of my machine after hard reset.

    I think that for whatever reason a stepper motor can't initialize it's position. Most of the time it's a lose connection

    or a dirty reel sensor

    After systematically unplugging and replugging every connector in the machine and seeing if that works you should remove the

    lower reel cage, then reels (keep them or number them 123 in order!) and check all the connections and clean the sensors.


    I certainly could be wrong, and usually am, but that's what I would do !

  10. The following 2 users say "Thanks" to rockston


  11. #8
    Tokie Owens Pepperdanky's Avatar
    Join Date
    Sep 2012
    Location
    Delhi, New York
    Posts
    5
    Thanks
    1
    Thanks Received
    7

    Default Re: E-6 error on DON DON KING machine by Daido

    Well after taking your advice I took on the task of unplugging and replugging every connector and when playing with the connectors around the reels I solved my problem! Thank you again for the help I am very grateful and super excited to play on this awesome new machine now! Would not have had this fixed so quickly if not for this site so big thanks to pachitalk!!!

  12. The following 2 users say "Thanks" to Pepperdanky


  13. #9
    Eye Shooter rockston's Avatar
    Join Date
    Apr 2012
    Location
    Chicago
    Posts
    550
    Thanks
    662
    Thanks Received
    883

    Default Re: E-6 error on DON DON KING machine by Daido

    Great! Have fun, that's a really cool machine !

  14. #10
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,333
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: E-6 error on DON DON KING machine by Daido

    Quote Originally Posted by Pepperdanky View Post
    Well after taking your advice I took on the task of unplugging and replugging every connector and when playing with the connectors around the reels I solved my problem! Thank you again for the help I am very grateful and super excited to play on this awesome new machine now! Would not have had this fixed so quickly if not for this site so big thanks to pachitalk!!!



    Congratulations!! Glad to hear it was a simple fix



    and a big Welcome to PachiTalk!!


    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



Similar Threads

  1. Help needed with error code on Daido Fever Pachinko Machine
    By njgirl428 in forum Pachinko Technical Support Tickets
    Replies: 4
    Last Post: 07-06-2012, 05:09 AM
  2. King Kong Error!
    By qwerty21 in forum Pachinko Technical Support Tickets
    Replies: 9
    Last Post: 01-24-2010, 03:01 AM
  3. E-1 Error on my King Camel
    By jweaver in forum Model Talk
    Replies: 4
    Last Post: 08-10-2008, 11:04 AM
  4. Don Don King error code
    By smm88fan in forum Pachislo Modifications
    Replies: 12
    Last Post: 08-08-2005, 08:12 PM
  5. King Camel Error
    By cmk8895 in forum Pachislo Modifications
    Replies: 7
    Last Post: 06-15-2005, 09:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •