Trying to figure make and model of machine
Hi to all
I am new to this scene. I recently aquired a machine all I know about it is it was made in 2006-2-22 .The machine says welcome to fabulous las Vegas nevada,what happens in vegas stays in vegas it is a three reel type.Any help is greatly appreciated.
Thanks
KJR
Re: Trying to figure make and model of machine
If you post pictures I can ID it for you. There is no such machine That says "welcome to Las Vegas" so most likely Some one removed the original art work and replaced it with what you see.
.
Chris Dice
Yo 11 any 7
Re: Trying to figure make and model of machine
DSCI0731.jpgDSCI0728.jpgDSCI0734.jpg I had more pics but they did not load-mistake on my end .Thanks for all the help thus far
Re: Trying to figure make and model of machine
OK. that's a 2006 Rodeo Ore no Sora type a. The bad news is that machine has an 18" lcd monitor over the reels. It looks like it was removed and replaced with a decal. Also your missing the top lights and bonus indicators. Here is a picture of what your machine started its life as.
Chris Dice
Yo 11 any 7
Re: Trying to figure make and model of machine
Welcome to Pachitalk
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: Trying to figure make and model of machine
Thanks for the info. I actually do have the top section but had it off to glue the lens that was broken. Do you have and idea where I could obtain a copy of the instruction manual or anything like that as I have no clue to its functions? Why would they pull the screen and replace it with a decal? In its current state is it worth anything? Thanks again for your helpOriginally Posted by Chrisdice
Re: Trying to figure make and model of machine
Welcome to Pachitalk!
"Life consists not in holding good cards but in playing those you hold well."Pachiholic and Proud!!!サメ
Re: Trying to figure make and model of machine
In good condition with the screen intact and the original art work it would be worth about $200 in its present condition I'm guessing $50-100. As to why they remove the screen?, more then likely there selling the lcd, then they stick on the decals and try to sell the pachislo also. Double dipping in a sense. I'll check around for a a manual I don't know any off hand for that type of cabinet.
Chris Dice
Yo 11 any 7
Re: Trying to figure make and model of machine
Actually I was looking at your pictures again. It looks like your lcd screen is in still in the game. It might just be unplugged.
Chris Dice
Yo 11 any 7
Re: Trying to figure make and model of machine
There is a florescent tube that is burnt out, but I am sure is there. There is a light around the screen.
Re: Trying to figure make and model of machine
Hello all I have yet another question or two. 1st I do not have a reset key anyone have any suggestions where I may be able to obtain one? 2nd the flourescent bulb in my machine is burnt out. It is approx. 12 inches long with the wire leades attached ,somewhere I read they called it a T4 . My search for T4 resulted in pinned bulbs only or one site had ones wiyh leads with a minimum order of 300. Any suggestions on the bulb? Thanks for the help.
P.S. I know the machine is not worth alot but would like to see it in action with all the bells and whistles working if possible.
Re: Trying to figure make and model of machine
replace the whole key reset switch with a timple toggle switch..
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: Trying to figure make and model of machine
as for the light i cant help ya
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: Trying to figure make and model of machine
I'm not really of much help, but posting some pics of the bulb can't hurt..
"Blowing smoke rings at the moon."
Posting Permissions
Reply With Quote