Stock Bugyo help

[a1a9]

I have a Stock Bugyo (NET) that has been working great but now it has suddenly stopped working. It powers up, accepts tokens but when I hit the spin lever nothing happens. No error codes are displayed and I have done a full reset. Please help...

Thanks in advance - Peter

[luckydog]

check your connections on the spin lever and 3 buttons

[Moparformances]

connections

and

Welcome to Pachitalk

[a1a9]

Thanks for the replies. I have checked.. and rechecked all connections. I have also checked the fuse on the spin board... still nothing.

[luckydog]

i still think it is a poor connection or maybe contacts need cleaning,

if i remember correctly there is a small circui board in the spin knob also

net machine are built like tanks and very seldom have things go wrong
______________________________________________________

[Wayne-Ooo]

I would check the stop buttons. If one of the stop buttons are stuck, the spin lever won't work.
When you put tokens in, the start light should come on. If not, you do have a stuck button.

[a1a9]

Thanks, after banging my head against a wall looking for a loose connection and/or a stuck button. Using a multimeter I finally found the single bet button was stuck and making constant partial contact. Now the question is what is the best way to fix/clean this button?

Thanks again!

Peter

[luckydog]

spray a lot of contact cleaner around the button while pressing it or.

maybe just disconnect it???

[Wayne-Ooo]

Please read this thread on cleaning stop buttons.Cleaning the reel stop buttons

[a1a9]

For now it is disconnected but unfortunatly I can't rest until everything is working. I have button soaking in Isopropyl Alcohol. I'll blow it out and check again.

Thank you, looks like problem solved!

[hanabi]

that's great news!!




and welcome to PachiTalk!!