Neoplanet error E-2 Help!

[Dcurtis]

I have a Yamasa Neoplanet machine that is displaying an E-2 error code. I've tried a full re- set, pulled the coin hopper out and cleaned it, and also pulled out and cleaned the coin feed mechanism. Any help would be appreciated!

[Moparformances]

stole this info from another post... thanks Yose

The E-2 can be a coin jam in the token slot that is stuck or not passing through the sensor or a token is stuck in the hopper.Try emptying the hopper and manually spinning the bottom of the hopper that looks like an old phone dial and see if a token kicks out freely.There may be a yellow button on the power panel that will spin the hopper backwards to clear a jam.See if that works.

and of couse

Welcome to Pachitalk

[yose]

You might have a dirty sensor on the hopper try cleaning that with glass cleaner and drying it good. O a loose connection at the hopper wireing terminals.

[Frank A]

There is also an issue with the capacitor in Neo Planet and Neo Planet Pulsar. You have to do a reset if you let it stay without power for 7 days or more.