Results 1 to 18 of 18

Thread: help appreciated

  1. #1
    Tokie Owens mia falasca's Avatar
    Join Date
    Dec 2011
    Location
    new jersey
    Posts
    6
    Thanks
    0
    Thanks Received
    12

    Default help appreciated

    any information on this machine would be greatly appreciated. thanks lot guys


  2. The following 4 users say "Thanks" to mia falasca


  3. #2
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,086
    Thanks
    26,534
    Thanks Received
    12,120

    Default Re: help appreciated

    hard to tell but i would say its a 76 or so Nishijin..

    please post a few more pics...

    Welcome to Pachitalk

    take a look at this and see if it helps

    http://www.pachitalk.com/forums/vint...l-b-video.html
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  4. #3
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: help appreciated

    :welcome:

    It looks like it is either a 75 or 76 Nishijin Model B with a Royalty center feature. I have a machine with the same exact center feature. but my machine is about a year older than yours (I think)

    Please post some more pictures. (especially one of the orange sticker on the right side there)

    100 machines and counting...

  5. The following user says "Thanks" to mxfaiman


  6. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,086
    Thanks
    26,534
    Thanks Received
    12,120

    Default Re: help appreciated

    3463.jpgthis one has the same center as yours (MxFaiman has it now)


    3924.jpgthis one has the same Olympic back ground (cell)
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  7. The following 3 users say "Thanks" to Moparformances


  8. #5
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: help appreciated

    Quote Originally Posted by Moparformances View Post
    this one has the same center as yours (MxFaiman has it now)
    Man It doesn't look as good as it did then. I noticed some parts of the plastic broke around the lock. How did that happen because it is all intact there.

    Do you know when that picture was taken?

    100 machines and counting...

  9. #6
    Tokie Owens mia falasca's Avatar
    Join Date
    Dec 2011
    Location
    new jersey
    Posts
    6
    Thanks
    0
    Thanks Received
    12

    Default Re: help appreciated




    I'im not really familiar with these machines so anymore information would be great like restoration and value and any other interesting facts about them thank you

  10. The following 2 users say "Thanks" to mia falasca


  11. #7
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,086
    Thanks
    26,534
    Thanks Received
    12,120

    Default Re: help appreciated

    Quote Originally Posted by mia falasca View Post



    I'im not really familiar with these machines so anymore information would be great like restoration and value and any other interesting facts about them thank you
    pop the glass front door open .. the date is behind the door...
    ______________________________________________________
    Quote Originally Posted by mxfaiman View Post
    Man It doesn't look as good as it did then. I noticed some parts of the plastic broke around the lock. How did that happen because it is all intact there.

    Do you know when that picture was taken?
    dont know what to tell ya sir... that pic is a year and a half or so old (or more?)... Brother John had the machine for a few months befor ya got it...
    Last edited by Moparformances; 12-09-2011 at 10:11 PM. Reason: Automerged Doublepost
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  12. The following user says "Thanks" to Moparformances


  13. #8
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: help appreciated

    Quote Originally Posted by mia falasca View Post
    I'im not really familiar with these machines so anymore information would be great like restoration and value and any other interesting facts about them thank you
    Thanks for that picture. But I actually need to see the little digits at the bottom of the yellow square. No worries.

    I'm not sure what you mean by restoration but it does increase value if you do it correctly. If you take it to someone to get it restored it will cost upwards of $500. (Which kills the value of the machine.)

    Value is really hard to say on machines. It really depends on condition, rarity, and location. Unfortunately I can't give you an estimate on price because I haven't seen your whole machine yet. (need whole front and back pics) But if it is all complete I'd say $50 in any location.

    100 machines and counting...

  14. The following 2 users say "Thanks" to mxfaiman


  15. #9
    Tokie Owens mia falasca's Avatar
    Join Date
    Dec 2011
    Location
    new jersey
    Posts
    6
    Thanks
    0
    Thanks Received
    12

    Default Re: help appreciated


  16. The following 3 users say "Thanks" to mia falasca


  17. #10
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: help appreciated

    Looks good from the front. I'll bump my estimate up to about $60 the back is the big thing that can drop the cost. Because if one part is missing it is impossible to replace which decreases value.

    100 machines and counting...

  18. #11
    Eye Shooter Rival's Avatar
    Join Date
    Apr 2011
    Location
    Fishers, Indiana
    Posts
    684
    Thanks
    177
    Thanks Received
    1,985

    Default Re: help appreciated


  19. #12
    Tokie Owens mia falasca's Avatar
    Join Date
    Dec 2011
    Location
    new jersey
    Posts
    6
    Thanks
    0
    Thanks Received
    12

    Default Re: help appreciated















    just a couple more images to help identify the model of the machine

  20. The following 3 users say "Thanks" to mia falasca


  21. #13
    Tokie Owens mia falasca's Avatar
    Join Date
    Dec 2011
    Location
    new jersey
    Posts
    6
    Thanks
    0
    Thanks Received
    12

    Default Re: help appreciated

    im beginning to find that these are pretty cool machines .. and to think i picked this out of someones trash can today haha ... is it normal if the center decoration of the machine is the same background and the 1976 but differnet centerpiece?

  22. #14
    Ensign Newton owennewton's Avatar
    Join Date
    Mar 2007
    Location
    McMinnville, Oregon, United States
    Posts
    4,830
    Thanks
    32,278
    Thanks Received
    5,244

    Default Re: help appreciated

    Quote Originally Posted by mia falasca View Post
    im beginning to find that these are pretty cool machines .. and to think i picked this out of someones trash can today haha ... is it normal if the center decoration of the machine is the same background and the 1976 but differnet centerpiece?
    Yes, very normal, centers and pockets can be found across years and brands.
    the

    LLTR

  23. The following user says "Thanks" to owennewton


  24. #15
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,086
    Thanks
    26,534
    Thanks Received
    12,120

    Default Re: help appreciated

    nice looking machine... for trash

    I see your missing the track cover off the back.. it will cause ya some grief when ya start playing it... but that piece can be made yourself or ya can buy a repop piece..

    hear is a few pics i have made for friends.. it should give ya an idea

    track cover (2).jpgtrack cover.jpgPachinko B cover.jpg
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  25. #16
    Tokie Owens mia falasca's Avatar
    Join Date
    Dec 2011
    Location
    new jersey
    Posts
    6
    Thanks
    0
    Thanks Received
    12

    Default Re: help appreciated

    thanks

  26. #17
    MacGruber JACKSJE4's Avatar
    Join Date
    Dec 2008
    Location
    Denver, CO
    Posts
    5,002
    Thanks
    11,367
    Thanks Received
    14,376

    Default Re: help appreciated

    I love it when you find the Nishijin machines that have all clear plastic on the back! Once they have been fully disassembled, cleaned and reassembled, they are fun to watch while someone is playing the machine because you can see the entire back of the machine in action. I do not see too many of them where all of the plastic pieces are see-through. You scored!!
    Jeff Jackson, Denver CO

    There is a fine line between "hobby" and "mental illness."

  27. #18
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: help appreciated

    Holy Cow!

    That is a Nishijin Model B Ex-Change. In other terms the whole playfield can easily be changed. There aren't many of these that are left. Member Carlw sold one on ebay recently and I think it sold close to $100 (might have been higher) But you need to clean it to get close to that type of money. In my eyes it is a sought after machine. (but not as valuable as a power flash)

    Oh and the date it was built is about 1977

    100 machines and counting...

  28. The following 2 users say "Thanks" to mxfaiman


Similar Threads

  1. Replies: 14
    Last Post: 11-24-2010, 05:39 AM
  2. Replies: 16
    Last Post: 09-19-2009, 06:18 PM
  3. your help is highly appreciated!
    By Ritchie Rich in forum Model Talk
    Replies: 5
    Last Post: 08-16-2005, 09:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •