My new pachinko Powerflash

[brandonevans428]

Just got it for $135.00 Only missing the front glass and a small white piece. Other than that all electronic components are here and the cell is really nice. Just a good cleaning I should be ready to use this baby.

[Moparformances]

please post a few pics of the whole front and back side

does it have a transformer??

nice looking thunderbird machine...

[brandonevans428]

A few more pictures of my powerflash

[Moparformances]

kinda hard to tell in thepics but im perty sure ..

the gray wires that are hanging need 24 volts... it looks like the transformer is hooked up to the lights.. ya know they only required 10 volts when originaly in the parlor..

take a look at this

http://www.youtube.com/user/moparfor.../5/XE9YEssgjIc

this is the kind of transformer i used...

24 votls with a center tap to power the bulbs
http://www.ebay.com/itm/270860872554...84.m1423.l2649

i just bout a bunch of transformers like these if ya need one
______________________________________________________
with so testing that transformer might work for ya???

[brandonevans428]

So basically it looks as if the lights are plugged into the transformer and if I plug it in were going to have some problems? Does it look as if I can just plug it in. I might purchase a new transformer but I'll test this one first. Just a little nervous as to if I might blow a fuse or something wrong. So I should attach the gray wire you say?

[Moparformances]

test the transformer and sew what its puting out...

there are lots of output wires on that transformer so your gona have to find the ones that put out the right voltage...

NO i would not just pug it in

[owennewton]

that transformer is frightening! I would not plug it in until you know for sure what set of wires is what. It should have a diagram or list of outputs on it. If not and to double check even if there is one you need to test it with a tester, if you don't know how find a friend that can show you. as soon as you are sorted with a transformer then you can try hooking the machine up.

[brandonevans428]

How must I check how much voltage comes out for what wire if I can't plug it in like i'm sorry i don't know how i am going to check if I can't plug it in. I'll check the wire. I also couldn't atch that video for some reason you posted. I;m sure once I watch it It will make sense.

[Moparformances]

we mean to have it hooked to the Pachinko... in the picturees it still hooked to the Pachi... mark the wires that are hooked up so ya have a guess where to start and cut it free from the pachi...

then ya can start testing