Taiyo Elec. Maturi-ish type frame, Utah

[WondersPachi]

Hey guys,


Check it out a Taiyo Elec. "Kitty ears" frame machine. Very similar to the yellow Maturi frames they have the same bottom with a different door and a pinkish color theme.

These are pretty rare to see pop up and there great machines! They don't really rely on an animes and such for themes (not that thats bad) and simply come up with nifty designs to be eventually lost in in-distinction, wonderful!

http://salt_lake_city-ut.geebo.com/m...hinko_machine/


PS After a VERY extensive repair on my girlfriends Lexus SC300 I'll be picking back up on my worm lifter build.

I Fix/Replaced the Head gasket, intake gaskets, exhaust gaskts, timing belt, idle speed connector, O-rings, valve cover gaskets, cam bearing seals, harmonic balancer, plugs and plug wires plus alot of procedural work shes purrin like a kitten! PLUS there is NO clymer or haynes for the SC. Had to do alot of internet diggin too! Cranked on the fist spin! Woot Woot!

[owennewton]

always a good feeling when it starts up with no leaks the first try.


BTW... I am soon in the market for a lifter to supply a island with 8 modern machines

[WondersPachi]

I'm working hard to get these built. Found some resources but its hard to peice it all together but I'll get it.

[yose]

Does'nt it make you feel good after all the swearing and cuts and scrapes and grease all over your hands and face and some extra parts that don't seem to go anywhere,and when the engine turns over and everything is working like it's supposed to, man thats when you really feel like you've accomplished something. That was a major undertaking you did ,job well done

[WondersPachi]

Does'nt it make you feel good after all the swearing and cuts and scrapes and grease all over your hands and face and some extra parts that don't seem to go anywhere,and when the engine turns over and everything is working like it's supposed to, man thats when you really feel like you've accomplished something. That was a major undertaking you did ,job well done

Thanks Yose, I only had two bolts left over thankfully (went in the cam pulley cover plate and I noticed it right after we torqued the cam pulleys down ) . Invested in two Plano flat tackle boxes and sharpie marked the groups of bolts and nuts as I went. Made for a much easier assembly.