Results 1 to 6 of 6

Thread: Pulsar Big Chance 7777

  1. #1
    Tokie Owens ruesterdog's Avatar
    Join Date
    Aug 2011
    Posts
    2
    Thanks
    0
    Thanks Received
    0

    Default Pulsar Big Chance 7777

    I just purchased a Pulsar Big Chance 777. For the most part everything works. But, the flourescent lights flicker and the 1,2,3, lights on the left hand side dim every once in a while. I measured the voltage acoss the 1,2, and 3 lights when the are dim and found them to be around 10 volts instead of 21 volts when they're bright. Does anyone have any ideas on the cuase? A bad power supply?

  2. #2
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,105

    Smile Re: Pulsar Big Chance 7777

    most likly a poor connection somewhere in your wiring, which is a common problem

    unplug and reseating wires usually fixed that
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  3. #3
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    13,663
    Thanks
    25,803
    Thanks Received
    11,654

    Default Re: Pulsar Big Chance 7777

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  4. #4
    Tokie Owens ruesterdog's Avatar
    Join Date
    Aug 2011
    Posts
    2
    Thanks
    0
    Thanks Received
    0

    Default Re: Pulsar Big Chance 7777

    Quote Originally Posted by luckydog View Post
    most likly a poor connection somewhere in your wiring, which is a common problemunplug and reseating wires usually fixed that

    I tried reseating the cables with no luck. *But I did notice the fluorescent light stopped flickering when I disconnected the yellow cable to the 1,2,3 lights. *Do you have any ideas that would cause that? *Do you know if I get schematics? *Thanks in advance for all your help. *Sent from my iPhoneOn Aug 21, 2011, at 5:36 PM,



    I tried reseating the cables with no luck. But I did find that when the fluorescent lights were flickering, I disconnected the yellow cable from the 1,2,3 display board and the flickering stopped. Do you have any idea why that would happen. How can I get schematics? Thanks in advance for your help.
    Last edited by hanabi; 08-22-2011 at 04:11 AM. Reason: removed phone no etc

  5. #5
    Kungishi yose's Avatar
    Join Date
    Oct 2010
    Location
    roy utah
    Posts
    1,477
    Thanks
    3,485
    Thanks Received
    1,083

    Default Re: Pulsar Big Chance 7777

    It could be a loose ground wire or a pinched wire on the door by the hinges.And welcome to pachitalk
    IMAGINATION IS MORE IMPORTANT THAN KNOWLEDGE

  6. The following user says "Thanks" to yose


  7. #6
    Eye Shooter SlotsRfun's Avatar
    Join Date
    Oct 2009
    Posts
    538
    Thanks
    113
    Thanks Received
    1,012

    Default Re: Pulsar Big Chance 7777

    You need a wiring diagram or another machine to compare it to.
    if the flicker stops when the yellow wire is disconnected I would leave it that way.
    Like Yose said, check for loose wires or if they are getting pinched when you close the door.

    Anyone have a wiring diagram for this machine?

Similar Threads

  1. Pulsar BIG CHANCE 777 $70 Brooklyn Park, Minn
    By SlotsRfun in forum FB Marketplace, Craig's List and Other Listings
    Replies: 0
    Last Post: 01-07-2010, 09:41 PM
  2. Lucky dog just hit 7777!!!!!!!!!!
    By scooby_doo_m2002 in forum These are the days of our lives...
    Replies: 10
    Last Post: 04-07-2007, 01:00 PM
  3. I Hit 7777 On SPINLUCK!!!!!!!!!!!!!!!!!!!
    By Eddie in forum These are the days of our lives...
    Replies: 34
    Last Post: 07-29-2006, 01:26 AM
  4. Can 7777 be hit on SL only IGT knows!
    By Eddie in forum Model Talk
    Replies: 8
    Last Post: 07-28-2006, 09:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •