coin mech problem

[den-diggaler]

hi have checked hight all seems good still think 1st sensor is not working 42248334 sensor.jpg

[Drunkenclam]

You might want to read this thread. Lozpeters had the same problem.

http://www.pachitalk.com/forums/pach...lp-noob-2.html

Can get optic sensors from RS.

[den-diggaler]

Can get optic sensors from RS.

who is Rs?

[Lou]

Can get optic sensors from RS.

who is Rs?

http://uk.rs-online.com/web/?cm_mmc=...FcRtfAodXk07fw

stolen from the thread clam mentioned

[SlotsRfun]

On the back of your coin mech in your picture I noticed that the slug magnet seems to be pushed in a good bit too far.
The slug magnet is the round brass cylinder with a screw in the side of it that holds the magnet core.
Loosen the screw and push the magnet out so it is sticking out about and 1/8th of and inch. Retighten
the screw and give it a try.
As a rule of thumb I always push the magnet out (away from the coin track) and leave it that way.
This eliminates a lot of token rejection trouble, particularly the trouble you are having.

I strongly doubt your sensor is bad unless someone zapped it.

PachiTalk

[den-diggaler]

magnet core has broken off, i bought machine with coin mech problem the bloke i got it from had it for a couple of years he got it with the problem so maybe he zapped sensor