Results 1 to 5 of 5

Thread: error help!!!

  1. #1
    Tokie Owens muffyn's Avatar
    Join Date
    Jul 2011
    Posts
    10
    Thanks
    0
    Thanks Received
    5

    Default error help!!!

    went to try my slot machine, its a simple one with the 3 buttons to stop the reels.

    makes a loud machine grrrrrrrr noise & error in the spot where it lists token total is "88"
    & on the left side error in the wait spot is "EE"

    helpppppppppp

  2. #2
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,335
    Thanks
    51,524
    Thanks Received
    30,712

    Default Re: error help!!!

    Hello, I've moved this thread to the pachislo section, as i am presuming it is a pachislo, but if you could give the name of your machine and / or manufacturer or even a pic it would be helpful

    Have you tried resetting your machine??

    Always a good idea to try that a couple of times to make sure you're following each step carefully, it is easy to skip something, we've all done it

    Here's some info on resetting, I have collated from the Forums for you:


    "How To Set the Skill Levels of Your Pachislo
    HOW CHANGE ODDS:

    "TURN YOUR MACHINE OFF FIRST"

    1. Locate internal key switch, and insert key.
    Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

    2. Turn "reset" key switch to on, to access programming mode.

    3. Turn on machine now.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door. (please note on some models the numbers could be displayed inside the machine)

    5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

    6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

    7. Turn "reset" key back to off.

    8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.



    Also just to confirm some additional info (from member Chrisdice) regarding hard reset

    Two switches on the power supply:
    - One requires a soft reset at the end of a bonus.
    - The other pays out all tokens at the end of a bonus.

    For these switches in most cases off is in the down or right position. The for off and on are:

    無 = off

    有 = on



    I'm not sure what an 'EE' error is, it doesn't sound like the usual codes for hopper empty or hopper jams, but if the resets don't clear it, then I would investigate the hoppers next.

    Let us know how you get on

    Good Luck!!
    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  3. The following 5 users say "Thanks" to hanabi


  4. #3
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,335
    Thanks
    51,524
    Thanks Received
    30,712

    Default Re: error help!!!

    *Thread Update*

    I see from another thread that it is an Aladdin II machine and that you have performed the hard reset and are now looking to sort the sound

    Hopefully the members can offer advice on troubleshooting for you


    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  5. The following 2 users say "Thanks" to hanabi


  6. #4
    Kungishi yose's Avatar
    Join Date
    Oct 2010
    Location
    roy utah
    Posts
    1,477
    Thanks
    3,485
    Thanks Received
    1,083

    Default Re: error help!!!

    I see from another post that you did a full reset and it worked but no sound.Did you try the speakers connections to see they are not loose.Or possibly a bad fuse.Trace the wires back from the speakers to the sound board and make sure the connection is tight there.
    IMAGINATION IS MORE IMPORTANT THAN KNOWLEDGE

  7. #5
    Eye Shooter SlotsRfun's Avatar
    Join Date
    Oct 2009
    Posts
    538
    Thanks
    113
    Thanks Received
    1,012

    Default Re: error help!!!

    i think the loud Grrrr noise indicates that your reels may be out of alignment or need some cleaning/lubing to free them up.
    The 88 ee probably means that the wiring needs to be checked carefully for corrosion on the connections.
    Unplug each connection CAREFULLY, clean them and use some oil to lube them and reconnect.
    Start with the connections on the door and work backwards. check and clean all wire connection and the cable connections.
    you then need to do the full reset as mentioned above. But your troubles may remain
    until you clean and free up the reels so they can spin properly.

  8. The following 2 users say "Thanks" to SlotsRfun


Similar Threads

  1. E4 error
    By PaulC in forum Pachislo Technical Support Tickets
    Replies: 10
    Last Post: 11-03-2010, 07:51 AM
  2. E4 error
    By lvandersloot in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 10-16-2010, 07:52 PM
  3. Error 1
    By zax15 in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 10-13-2010, 08:44 PM
  4. Error E6
    By promojoe13 in forum Pachislo Technical Support Tickets
    Replies: 13
    Last Post: 04-11-2008, 10:08 PM
  5. error
    By MrGneiss in forum Suggestion Box
    Replies: 7
    Last Post: 08-18-2005, 05:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •