Battle counter help

[BigBearSteve]

Hi Again,

Here is the only connector you need to control the BC for the standard functions

Pins 1-6 (3-pairs) Sorry for the wrong connector info before BBS

RR

Thanks, I'll give that a shot

[Drunkenclam]

Thanks RR
Thats the one I thought it was

[BigBearSteve]

Any idea what the plugs from the small box go to?





______________________________________________________

I don't have the info to help but please film it when you go blow up the slot car motor

BTW, I did, but haven't had a chance to post it yet.

[compirate]

super clear pick of the box would help

[BigBearSteve]

I couldn't get a clear pic with a camera, so I scanned the box.

Image0003.jpg

[BigBearSteve]

Here's a clearer image

Image0002.jpg

[compirate]

接点 contact
電圧 voltage (stay away from these )
The characters closest to the edge are wire colors.

bottom of pic:
大当たり入力 Hit Enter
ス夕ート入カ
left and right of each one is voltage input/contact input

コンヒュー夕ー出カは入カ

That's the best I can do right now, been driving all day and those characters look so small!

If you can come up with a larger picture some way it would be easier. Is it a reflective problem or your camera won't let you get that close?

Here's an interesting page showing where to hook up the connections: 大一電機産æ¥*æ*ªå¼�会社｜デー太郎：デー太郎 é…�線資料

[compirate]

接点 contact
電圧 voltage (stay away from these )
The characters closest to the edge are wire colors.

bottom of pic:
大当たり入力 Hit Enter
ス夕ート入カ
left and right of each one is voltage input/contact input

コンヒュー夕ー出カは入カ

That's the best I can do right now, been driving all day and those characters look so small!

If you can come up with a larger picture some way it would be easier. Is it a reflective problem or your camera won't let you get that close?

Here's an interesting page showing where to hook up the connections: 大一電機産æ¥*æ*ªå¼�会社｜デー太郎：デー太郎 é…�線資料

[BigBearSteve]

Is it a reflective problem or your camera won't let you get that close?

It's my old camera, I cannot take close up pics.

I'll see if i can enlarge the scanned image

Thanks

[BigBearSteve]

Are these three plugs are the proper connections to the cell?

Image000.jpg

[new in town]

Ramen Power to the Rescue!

[Drunkenclam]

Thats what I fingered out.
I think RR is saying take the 6 pin lead. and seperate it in to the three pairs for the cel. I'm sure I saw somewhere here, the three leads we both have cut and spliced onto the 6 core lead. Then plugged into the cel.
I haven't had a chance to check mine with a meter yet to see if you need the box. Sorry. A 22 hour work day is hell

[rubberratt]

Yes ! Drunkenclam has got it right.

you don't NEED the box to play. If you really want to use it, you'll need to traceback the wiring, translate the box, and hope you don't send voltage to the wrong place

The method that works sounds like this

Take the "colorful rainbow wire" plug and insert it into CN6 - wire (splice if ya need to) to pins 1,2 then 3,4 then 5,6 (7,8 not used well... by me anyway)
Put whatever connectors you require on the ends so they fit /connect to the back of your pachi.

Short them to discover (I forget at the moment) which pair does what. You know this already but...
1 pair will do BIG HIT (bonus light show)
1 pair will count pocket hits (counter goes up by 1 for each short)
1 pair will not do anything (High Probability mode) to verify, put a jumper wire across this pair and leave it, then short the BIG HIT pair (once and remove) and then observe the BC
It should be blinking back and forth for battle/HP mode, remove the jumper when the hypnosis wears off.

I can get pics to you and more info if needed

[rubberratt]

Are these three plugs are the proper connections to the cell?

Image000.jpg

I'll check and up the picture of the box, and I'll re-post what I think should be okay?
(tomorrow morning though zzzzzzzzz) I think it might not be exactly correct

[BigBearSteve]

I'll check and up the picture of the box, and I'll re-post what I think should be okay?

I was just wondering if those wires coming off the box would work, since they already have "sankyo type" plugs on them

[Drunkenclam]

I did a few test on the little control box. The only way that you will be able to use it as a through connector is to connect it to a power supply.
Its labelled as 15vdc, But I used 12vdc for testing. Looks like we will have to breakout the soldering iron and heat shrink tubing.

[BigBearSteve]

Terminal #1 --Chance lights

Terminal #2 --Fever lights

Terminal #3 -- Start counter

Image0.jpg

[BigBearSteve]

Terminal #1 --Chance lights

Terminal #2 --Fever lights

Terminal #3 -- Start counter

Image0.jpg

I didn't connect power to the box, only the six wire plug from the counter to the box.

[rubberratt]

Cool - so you are all working now ???


Sweet Sweet Sweet !!!

[BigBearSteve]

Wait a minute... A blue smoke cloud sounds cool, maybe I'll go blow up a slotcar motor

I need Help I really do

For Owen and Mopar

http://www.youtube.com/watch?v=2hXgNSH31zk


______________________________________________________

Cool - so you are all working now ??? Sweet Sweet Sweet !!!

Yes, Thank you

Now I need to find some small plugs to fit the Speed Racer cell