Results 1 to 13 of 13

Thread: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

  1. #1
    Tokie Owens tovictorliu's Avatar
    Join Date
    Jul 2010
    Posts
    22
    Thanks
    0
    Thanks Received
    60

    Default My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Finally I made my first pachinko cabinet by reading a lot this web site information. Really thank every one's help on this web site, can't wait share my final work with you!

    My current machine's feature:

    1. New cabinet offer transparent ball top pool, provide winning ball paying and ball lending service. you can see very clearly from the transparent window if ball need to be refilled after serveral big bonus paid out.

    2. top ball pool can hold more than 5000 balls at same time and maxium can hold about 10000 balls.

    3. New cabinet has a card reader and Dongle 2.0 (Thanks Devrob's reader) at machine bottom side , so no more ball grabing for normal playing time

    4. Back side red ball lifter offer ball lifting service, so no more ball filling for the top ball pool during the normal playing time, also it offer an stop ball lifting sensor on the top ball pool if top ball pool over loaded

    5. Cabinet has a bottom ball holder at machine front bottom under card reader, just in case if you forget to close the machine bottom tray shutter, the ball wont spill out to everywhere.

    I didn't invent all of this, I just collect all this web site great information use 5 months to build this. Thanks everyone!
    Attached Images Attached Images

  2. The following 23 users say "Thanks" to tovictorliu


  3. #2
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    That looks fabulous!!! Great job!
    Dawn

  4. #3
    Kungishi yose's Avatar
    Join Date
    Oct 2010
    Location
    roy utah
    Posts
    1,477
    Thanks
    3,485
    Thanks Received
    1,083

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Boy you really did your homework,This is very impressive. Well done!
    IMAGINATION IS MORE IMPORTANT THAN KNOWLEDGE

  5. #4
    Tokie Owens tovictorliu's Avatar
    Join Date
    Jul 2010
    Posts
    22
    Thanks
    0
    Thanks Received
    60

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Thanks, My machine original was modified to "Full Cyclic" when I received it, I spent lot of time to change it back to regular, but these time also helped me to know this machine more, this is my first pachinko machine,Thanks this web site Montana's photo help, let me know this machine original's cable design, finally I successfuly changed machine back to normal and build this cabinet. Now I only have another small problem from my machine, I opened another thread for this question, if any one can help, I will be appreciated . Thanks !

  6. The following user says "Thanks" to tovictorliu


  7. #5
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    great looking unit...

    very nice
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. #6
    Blind Shooter Habious's Avatar
    Join Date
    Nov 2010
    Location
    Metro DC Area
    Posts
    74
    Thanks
    40
    Thanks Received
    154

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    I really like the clear plexiglass for the top ball pool. That's nice!

  9. #7
    Hyah! rubberratt's Avatar
    Join Date
    Jan 2007
    Location
    Nebula M78
    Posts
    1,969
    Thanks
    2,484
    Thanks Received
    2,631

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Suh-Weet

    Nice job

    せぶん戦闘機 せぶん

  10. #8
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Looks great...Well done
    Ian #UKPachinko

  11. #9
    Blind Shooter kapsreiter's Avatar
    Join Date
    Dec 2010
    Posts
    62
    Thanks
    0
    Thanks Received
    112

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    your lifter:

    Can you tell me when this lifter is working?
    all time when ou switch the machine power on or have it a detector ig balls are to lift?

  12. #10
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Quote Originally Posted by kapsreiter View Post
    your lifter:

    Can you tell me when this lifter is working?
    all time when ou switch the machine power on or have it a detector ig balls are to lift?
    the factory lifters are opperated by a weight sensor placed in the top hopper... when the hopper is low on balls they roll of the weight sensor and turn the machine on... as the hopper fills the weight of the filling balls turn it back off..

    hope that makes sense
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  13. The following 3 users say "Thanks" to Moparformances


  14. #11
    Master Inventor daverob's Avatar
    Join Date
    Nov 2005
    Location
    Brighton, UK
    Posts
    1,365
    Thanks
    1,961
    Thanks Received
    7,101

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Quote Originally Posted by Moparformances View Post
    the factory lifters are opperated by a weight sensor placed in the top hopper... when the hopper is low on balls they roll of the weight sensor and turn the machine on... as the hopper fills the weight of the filling balls turn it back off..
    There's also a similar weight operated switch in the track that the balls travel from the lifter's hopper to the rotating gear. The bottom of this track is only fixed at one end like a hinge, the other end sits on a microswitch and when the track fills up with balls, the switch is pressed down and the motor starts running.

  15. The following 2 users say "Thanks" to daverob


  16. #12
    Blind Shooter Montana's Avatar
    Join Date
    Nov 2009
    Location
    Berlin
    Posts
    75
    Thanks
    87
    Thanks Received
    283

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    This is really a fantastic setup. Looks great with this nice machine. Congrats

  17. #13
    Have no fear...... H20Dreams's Avatar
    Join Date
    Feb 2006
    Posts
    2,043
    Thanks
    2,514
    Thanks Received
    1,263

    Default Re: My new cabinet + Red ball lifter +Dongle 2.0 + Card reader

    Impressive set up!
    There's no need to fear....
    Pachislo: Speed Racer, King Camel, Beast Sapp, Sindbad Adventure, Death Valley.Pachinko: Popeye, Fever Kagetu, Fever Circus, Spiderman Neo American: Red,White,& Blue Deluxe

Similar Threads

  1. Card Reader Emulator dongle?
    By TNTahan in forum Pachinko Modifications
    Replies: 19
    Last Post: 06-28-2020, 08:02 PM
  2. card reader dongle
    By pachiwall in forum Modern Pachinko
    Replies: 12
    Last Post: 04-25-2011, 06:26 PM
  3. Card Reader Dongle Question
    By PanamaVet in forum Pachinko Modifications
    Replies: 8
    Last Post: 12-22-2009, 02:35 PM
  4. Cabinet For Indy, Dongle/Card Reader, Ball Lifter
    By pudiamond15 in forum Pachinko Cabinets
    Replies: 6
    Last Post: 12-03-2007, 12:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •