Maturi Giant Seven - are these led's out or is this normal?

[number42]

Hi guys,

I'm pretty new here, just got my second machine and I'm not sure if this is a problem. I was hoping for anyone who actually owns this machine if they can provide feedback. It appears that in the large led there are a few lights out - on the very left of the bottom section, and two on the lower right section. I only notice this when the machine is cycling to or maintaining the color blue - other colors appear to light in these areas with no problem. I wanted to see what other owner's experiences are before I call the retailer, as this may be normal on the machine. I will say that it was quite noticeable from across the room, which is how I first discovered it. I did see one video on youtube of this machine in fever mode and it appeared that there were also 'gaps' in the blue on the featured machine as well (link below). I'm attaching some pics of my machine - you can see gaps in the brightness when blue, but ok when red. Ignore the fact that entire sections of the large led in some of the pics are not lit (it cycles constantly).

Giant Seven on Youtube (same issue?)
YouTube - Giant Seven Pachinko ???- Fever Mode

Thanks to all who respond,

[number42]

Some other pics here - showing the 'broken' blue line mostly on the lower right, during the solid blue phase and in between color changes.

[owennewton]

I would say it has some out but it is something we have seen with other pachinkos and pachislos. The multi color leds have one or more legs give out and it ends up missing colors or with wrong colors.

something that in this case you will most likely just have to live with