FA: Star Wars Pachinko

[copious]

Star Wars Pachinko - R2-D2 Series - eBay (item 270487444295 end time Nov-25-09 17:30:49 PST)

[djcasper_bpm]

interesting fever "switch" who sells those?

[Lddrizzt]

It's just a momentary switch attached to a set of pins in the back. Couldn't find a pic, but if you do a search for bypass switch I think you should find a thread or 2.

[takethecastle57]

You just need a standard "Push button" switch and cut or splice one of the two wires coming out of connector CN8 on the back of the cell and then just wire it up to the push button and then you will be able to start the reach

[Lddrizzt]

Yes! That is the pic I was looking for. I thought I had one with the splice already in it.

And this works with other machines also. Just gotta find the right connector coming from the start pocket.

[BigBearSteve]

Does it actually start a Reach, or just a spin?

[compirate]

Spin

[Lddrizzt]

It just fools the machine into thinking a ball went into the start pocket. Great for showing off the machine to the relatives.

[victor]

has anyone heard of this ----------------victor

Cyclic - You don't load balls it cycles through 100 balls in the game and they are rerouted to the front.

[Ikaria]

has anyone heard of this ----------------victor

Cyclic - You don't load balls it cycles through 100 balls in the game and they are rerouted to the front.

Yep! That's the way my Star Wars is. You can play forever on 25 spheres.

[luckydog]

no lost balls in back or payouts in cyclic!!

the few balls shot just recycle

[compirate]

Musky did the best version of this, using a Gaku counter, modded the payout mech so that it works and counts, but still only uses a few balls