Polish carpenter strikes again :

[luckydog]

when your retired, you always think I'll do it tomorrow

after owning my Galaxy Train for well over a year I finally did my modified paint tray mod on it today

the sides are a hair higher than the pachinko I measured to cut the wood, I will need a little filler

I'm using an old office in/out tray with an old mouse pad to catch the balls.

I did a closeup of the battler counter connections in casse anyone is intrested on seeing where it connects.

once its all cut and painted its just a matter of leveling and putting the feet on the 2 uprights, screw the 2 uprights to the frame of the pachinko, put the brace board on the back and screw the top piece to the frame.

use a conduit clamp and oil funnel to direct and slow the balls dropping.

a little filler and touchup and your good to go.

[luckydog]

a few more pics

p.s. by putting the feet on the inside it helps support the weight of the pachinko and gives you a little more space for more

[mudfud]

nice simple design. will try this on some of mine.

[new in town]

Good Job LD.

[takethecastle57]

Bravo Brava !!

[beachcat]

sweet

[ShockSystem]

Simple, Effective and Inexpensive. That equals great work! Thank you for sharing.

[sppt76]

Nice and simple, as soon as I get my next machine that will be my next thing to work on.