Star Wars Pachinko

[millermaster1]

Good Morning!

I have a new problem with my Star Wars pachinko. Upon startup of the game, sometimes the video screen will not turn on? I will turn it off and turn it back on again and 9 out of 10 times the screen will be up and running. I use a power strip if anyone thinks that matters.

Looking for a photo of where the video connections may be so I can triple check those connections!

Maybe this is common? I

Any suggestions?

Thanks!

[compirate]

common problem with Sankyo's

[luckydog]

its a common problem and its usually because its too cool or the transformer is 4 or 5 amps.

[millermaster1]

its a common problem and its usually because its too cool or the transformer is 4 or 5 amps.

Would you suggest replacement of the transformer (if so, best price and type?) or just live with it?

[new in town]

How cold is the room when this happens?

[millermaster1]

How cold is the room when this happens?

Everything is in my basement, so the coldest may be 62 degrees! I would think that is a perfect temp for electronics?

[Youngjedi]

Unfortunatley, not for pachinkos. They don;t like the cold.

[new in town]

I would turn it on and let it sit for about 5 minutes. Shut it off then turn it on again and the screen should come to life. If not let it sit on for 10 minuets to warm up the LCD then the off and on thing once again.

Let us know what happened.

That is what I have to do to my Pallot. I'm luck that my Indy and Star Wars seem not to be affected by the cold.

[BigBearSteve]

I have 3 machines that do the same thing. (two of them are Star Wars) Got to let them warm up

[Chrisdice]

I have 3 machines that do the same thing. (two of them are Star Wars) Got to let them warm up

Whats the 3rd one?