cabinet ball feed

[kmhamel]

When I built my cabinets I used a 1"tube to feed my balls from the ball safe on top of the cabinet to the ball tray in the machine. The balls keep jamming up. Has anyone else had this problem, and how did they fix it. I was thinking of just redrilling and putting in a 1.5" feeder tube, but wanted to find out if someone else had an easer fix. Thanks

[luckydog]

one inch is pretty small, I would think you would be better with a 1 1/2 to 2 inch feeder tube.

[MrGneiss]

I used 2" pipe on all mine and they work jam free!!

[drcrippen324]

on my ball handelin system PachiTalk
i used 3 in push fit waste pipe on both feed and return and on th e2 3 machine systems i built so far i havent had any problems or issues

[kmhamel]

Thanks I'll jump up the size to 2".

[kmhamel]

Fixed...Thanks everyone.