Beast Sapp / No keys / Anyway to jimmy lock from back?

[magick211]

I recently got a Beast Sapp machine from a friend and he lost the keys. Im in the process of ordering keys, but until then does anyone know if there is a easy way to jimm the lock from the back of the machine? Thanks - Mike

[computer bob]

Try from underneath the machine. Carefully tilt it to see if there are access holes in the bottom so you can reach the lock with your hand.

[Tulsa]

You might just tie a small string around the latch and run it out the back so you can simply pull the string to release the latch. You'll of course have to follow computer bob's suggestion to open it initially.

[magick211]

No holes in the bottom There is a 1 - 1/2 inch sqare hole in the rear i tried a coat hanger but its next to impossilbe to do with that, i guess ill have to wait until i get a key. It has a full hopper too i just want to get my tokens out so i can mess with it a lil

[Tulsa]

I don't think I've seen a pachislo that didn't have the over-flow hole in the bottom. That hole is always big enough to stick your arm in. Depending upon the size of your arm of course.

You can always cut a hole in the bottom (far right side only as you face the machine) or in the back big enough to reach in.

[luckydog]

use a stick or broom handle, put it thru the hole and move one of the brass colored door latches, the other will move at the same time

[magick211]

I figured out how to open it from the bottom, I also tried a small master lock key and it opens the door