Transformer location on the frame...

[gottac]

Well I opened my machine because I have been battling some bouncing balls that are missing my ramp that returns the balls back to the front bucket... when I opened the door I noticed that there were 2 balls that found their way to right on the high volt legs of the transformer!!! (Glad they had shrink wrap on them)!!

Needless to say this got me worried and I moved the transformer up the side of the case vs the bottom of the original frame. I think this was a good move and I think I had to do this anyway to accomodate for one of Arbys "Spent ball box".

Anyone else doing the transformer side mount vs the bottom of the frame?

John

[luckydog]

Arby mounts some of his on the 4" by 1' leg.

[Tulsa]

Yes, Arby's method is far superior. Once he has the feet in place he makes sure they are long enough out of the back side to butt a 1x4 up against the back of the frame effectively extending the bottom and creating a platform for both the transformer and a ball tray or lifter tray.