My Electron teaser Vid

[Eddie]

I just took video of the Taiyo Electron arepachi but I have yet to Edit it.
In the meantime here is a clip shot after the vid was taken.
I just installed lights behind the 6 colored lenses on the machine. They are between the 2 circular lenses the "Bonus Light and the Jackpot/ Low Hopper light" respectivly.
It looks as if it were designed for lights but Taiyo decided not to go with it for some reason or other.
I found extremely small micro lamps from Radioshack and they happend to have come in the colors of the lenses on the machine Red, Yellow and Green. They are 6v and the power to them is 12v but only for an extremely short duration.
They are installed in a way so that they can be removed very easily if neccessary. If they burn out I will just wire in a resistor.
They are wired to the Jackpot light more for ease then my original plan of always on lights.
The pins have also been polished in this pic so you will see the difference on the main vid.
Hope you like the short vid clip and the first peak at a really cool machine.


[yt]58L6BqHs6Vo[/yt]

[dishpan]

Let me be the first to call out...

BINGO!

Well done eddie! You are such a tease!

[dattia]

Very cool Eddie, thanks for posting!!!

[slothappy144]

wire two lights in series for your proper voltage drop, it will extend the life significantly. I wired 3 12v lights in series for use in my 36 volt scooter it works like a charm.
Nice machine, thanks for posting the video.