New Rocky Machine

**caraudiomw** · 12-26-2006, 07:36 PM

just got my rocky machine, dont know where the factory volume control is, can anyone provide me with a manual or pics of where/what switches/buttons do?

**20sporty02** · 12-26-2006, 08:02 PM

volume control is loud or louder, here it is
http://www.pachitalk.com/forums/atta...2&d=1146352762

**caraudiomw** · 12-27-2006, 01:40 AM

yeah ive noticed its loud and super loud, right now i just have it off, anyone recomend a volume control for rocky? any other tips for this machine?

i also didnt mention that the field glass is busted in the uper right corner through both pieces, it seems like a stray ball or 10 that was in the box did this, im working with my Ebay seller to send me a replacement glasspiece, this unit still works with that piece missing, it took me a while to even notice it b/c where it is, if the seller wont replaces this piece, does anyone have an extra cheap?

**chmer01** · 12-27-2006, 02:35 AM

The easiest ones to install can be found here:
http://www.pachislo.com/pachislo/par...il/volume.html

They are what I installed on my machine.

Eric C.

**DaStooge** · 12-27-2006, 03:11 AM

Originally Posted by caraudiomw

yeah ive noticed its loud and super loud, right now i just have it off, anyone recomend a volume control for rocky? any other tips for this machine?

i also didnt mention that the field glass is busted in the uper right corner through both pieces, it seems like a stray ball or 10 that was in the box did this, im working with my Ebay seller to send me a replacement glasspiece, this unit still works with that piece missing, it took me a while to even notice it b/c where it is, if the seller wont replaces this piece, does anyone have an extra cheap?

If the seller doesn't replace goto your local hardware store and get some plexiglass, I've done this on a few machines that were missing one of the plates.

**caraudiomw** · 12-27-2006, 08:46 AM

chmer, what one of the volume controls do you have? the first one where it looks like you get five? that would work well, as my slot has 3 speaks and pachinko has 2. thx!

**Tulsa** · 12-27-2006, 08:54 AM

http://www.pachislo.com/pachinko/p_parts.html

Volume Control Chip (5 pieces)" $15.00

**caraudiomw** · 12-27-2006, 10:31 AM

can someone provide me with a picture process to reset this machine, i cant seem to find the reset switch,

**caraudiomw** · 12-27-2006, 05:36 PM

i just orderd the 5 sound controls, my rocky needs them BAD, and the slot is kinda loud too!

**caraudiomw** · 12-28-2006, 09:20 AM

new problem, last night i was trying to get into a fever, so i was feeding balls into the rocky pocket, after awhile all 2's came up and it took me into a movie mode and a bunch of rounds that advanced as a put balls into the rocky pocket, 3-4 balls came out everytime that i droped a ball into the pocket, however i was expecting 15 balls per shot to come out? or did i not hit the right bonus? after these rounds the "slot" reels came up and it went 100 times. i also noticed that sometimes the "flipper pocket" opens for a few seconds, then last night i heard the noise like it was going to open and it never opened? im going to tinker with it more today.

**luckydog** · 12-28-2006, 11:14 AM

one of your two ball tracks is not working right.

one track does normal payoff and the other pays out for fever rounds.

**caraudiomw** · 12-28-2006, 11:40 AM

is there anything i should be looking for?

**luckydog** · 12-28-2006, 12:01 PM

after reading the other thread on this problem, i didn't ask if the jackpot door had opened during fever, this is where you get your 15 ball payout. you need to get a ball in the trap door for a 15 ball payout.

look at the two ball tracks in the back, they should both be filled with balls.

you could try a ball dump to clear them to check the tracks and refill, remember to put a tray in the back to catch the balls and reset your dump lever.

**caraudiomw** · 12-28-2006, 12:13 PM

both tracks are filled with balls, could someone let me know where the ball dump lever is on rocky? also the reset switch?

also should this trap door be open all the time during fever? or not? i saw it open and close a few times quickly while the reels spun, that was about it

**Chris** · 12-28-2006, 12:16 PM

Originally Posted by caraudiomw

both tracks are filled with balls, could someone let me know where the ball dump lever is on rocky? also the reset switch?

also should this trap door be open all the time during fever? or not? i saw it open and close a few times quickly while the reels spun, that was about it

I have just got in, give me half an hour & I will take the photos & post them on here for you. Do you also have Skype as this may be easier if you do.

**caraudiomw** · 12-28-2006, 12:36 PM

i dont have skype, but i have AIM, i will be home about 5 today and will be playing with it then, i thank everyone for thier help! i hope that this is an easy issue to fix! no clue where 1/2 the things are on here, reset switch, ball drain, etc etc,

**Chris** · 12-28-2006, 08:02 PM

Attached is a picture of the ball dump from the hopper from Rocky. It is the lower Red knob on the right hand side that you need to press in. Just make sure you have something to catch all the balls in as they drain from the hopper.

Rockyballdump.JPG

**caraudiomw** · 12-28-2006, 08:09 PM

i see it!!! thank you! is the reset switch anywhere in that pic? ima newb!

**caraudiomw** · 12-28-2006, 08:32 PM

i hit that ball dump and they all come out but SOME below that other red switch thinger, it says 0 on the little LED on the back, and on front it has the one little LED blinking,

**birdbrain** · 12-28-2006, 08:36 PM

0 means no faults, red light says out of balls.

Thread: New Rocky Machine

Thread Tools

Display