My pachinko case

[MrGneiss]

I made a drain hole with PVC and mounted it to the back of the frame with a pipe clamp. However, it is not very secure this way and if I open the machine or touch it, it moves and balls go everywhere until I re-align it. It is sort of just floating there. I need ideas of a way to better mount the pipe, so that the drain hole on the machine is in the center of the pipe. I am not as concerned about the other end, as I have a paint tray mod to catch them. Any Suggestions are welcome.

moses619 was working on something, you may want to PM him to see if he can help you out...

http://www.pachitalk.com/forums/show...7&postcount=26

http://www.pachitalk.com/forums/showthread.php?t=15842