Schematics and or wiring diagrams

**docpaul1** · 11-29-2006, 10:32 PM

Is there a source for schematics and wiring diagrams for older machines?? I have a 1995 Taiyo Master Duck ( which I have been told is the same as a Olympic Joker or Blue Marine II or PlayGirl Queen II)???

**luckydog** · 11-30-2006, 12:14 AM

there are no schematics and wiring diagrams of any machines made that we know of.

**DaStooge** · 11-30-2006, 12:30 AM

there is a schematic for the stop board floating around here somewhere...I don't know if it would be the same for your machine though

**Eddie** · 11-30-2006, 12:56 AM

Here is one see pics below!

With this maybe somone can find the actual diagram in the Patent Im not savy enough.
http://gauss.ffii.org/PatentView/EP1430938

**docpaul1** · 11-30-2006, 08:22 AM

Thanks guys. I found that schematic of the board with the 30 pin connector,but my board has a group of 4 connectors ranging from a 2 pin to a 16 pin.
A wiring or pinout diagram would really be helpful for these machines.

**alstonj1** · 11-30-2006, 08:37 AM

whats the problem that your having i might be of some assistance i have a good amount of experience with the vintage machines in the area your talking about . as for the stop board its almost the same as that which is pictured except its spread out over the 4 plugs theres 33 pins but 4 are grounds so count as 1 pin which makes it the same 30 pin connections .if you trace out the componants you can trace it back to the plug for the pin out .

**docpaul1** · 11-30-2006, 06:00 PM

Thanks for the info Jeff. Have you traced the pins on the vintage board and identified the lead designations?? IF so, I don't want to try to reinvent the wheel. If a copy is available let me know.