Volume control on Saint Maria

[Chrisdice]

Hey guys, I'm messing around with the games I picked up from Logicprobe what great playing machines. Anyway I have the Saint Maria in front of me now and I'm planing on putting in volume controls. Only problem is so far I have only found the the wires for the Subwoofer. I can not find where the other speakers plug into on the back of the game. I unplugged every two wire conector and no luck. Can someone show me where the speakers plug into? Thanks.
Chris

[fronzdan]

Chris...it's not a two wire connector. Near the area where the subwoofer connection is, is a big gray connector with like 28 pins or so. The left and right connections are in that one. Off the top of my head it's the top two wires and maybe the pair that's 4 or 5 below that. I can check when I get home since I slapped some fixed resistors in there. The other connections in that connector are for the lights on the door etc. If you yank the whole thing you'll see that the sound goes out as well as the lights.

Edited to add:

Even better, here's the post where I found out where the connections are...thanks to noobie:

http://www.pachitalk.com/forums/showthread.php?t=9599 Post 7.

It's best to verify the wires before you do anything. I found you can remove the contact/wire from the connector housing if you have a needle or something like that to push in the retaining clip on the individual contact. My Saint Maria had the same wiring as noobie showed on his Sakura, but others said theirs was different.

[Chrisdice]

Yes.. It was 1 and 6. thanks. I must really do a crumby job of searching for things because I tried to search this problem before I posted. thanks again. I just have to go get some more volume controlls now. This tix is closed.