Activity Stream

T-800

Terminated

Sacked

Fired

Here is one with everything including an insane price and crazy shipping!! $125 BIN obo.. https://www.ebay.com/itm/365338429990

Tired

Dead

They're

Here's a further update... it appears to be the ball sensor for sure as well as potentially the inner ball microswitch (have zero idea how to get to...

You can also dampen the bells pretty easily by sticking something soft (cotton ball etc)between it and the plastic housing once you have everything...

Worked quite a way through this- completely dismantled chute, cleaned microswitches - sanded and cleaned entire metal strip that runs length of chute...

Found one!

One of the machines I purchased to clean up/restore had the bells removed by someone who owned it before me. Might want to consider doing that,...

They

Here are my home made tools. Not much to look at but they get the job done

As I said earlier I have 100% cleared the paths the balls flow - the motor doesn't activate

The

Make sure ball flow down both channels to the payout motor. The lobes are just there to force stop the balls from riding up. By trays. I mean...

Thats the only bad thing about the nextion is the cost. I'm using one to control my automatic door via an ESp32. also planned is control of the video...

Ya I have played with a bunch of displays for the arduino and esp's there are a ton of options but cost is the real consideration..

That and ball machines, the grandkids get all the 7/16 balls i bought off amazon..

I'll keep working on cleaning/fine-tuning it. In any case, thanks all for the help in getting my first one here up and running. I have students...

Here are some photos... when you said."bottom tray" I thought you meant the tray that catches the balls? Let me know your thoughts on where I...

I'll send photos

Probably between the upper and lower tray overflow channel.

Have you tried the Nextion Display connected to an arduino/ESP32. if fitting into a case all you need is a connector for the sensors, and power. Then...