The winning ball doesn't appear heavy enough to reliably push the arm down right before it drops in the back bin. Am I missing a weight?20170131_092627.jpg
Nishijin not cycling completely
The winning ball doesn't appear heavy enough to reliably push the arm down right before it drops in the back bin. Am I missing a weight?20170131_092627.jpg
Re: Nishijin not cycling completely
Re: Nishijin not cycling completely
which picture / machine
if its the second one please post a pic of the entire back please
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: Nishijin not cycling completely
Sorry, It's a pain to work from my phone. 1st pic is completely other machine. 2nd is correct. I'll get a full photo of back.
Re: Nishijin not cycling completely
The ball is heavy enough. Make sure you have enough balls in the machine and check the pivot points and linkages to make sure nothing is gummed up or binding.
Re: Nishijin not cycling completely
Yeah, about 1000 in there now. I adjusted the rod length on the right, and it seem a little better. All linkages seem OK, but maybe added up they are too tight.
Re: Nishijin not cycling completely
Looks like a Sankyo machine (not a Nishijin).
The linkage you adjusted is a good thing to try!
One other area I've seen is in the middle of the back of your machine, there is a dust cover secured by two screws with a metal badge that says SANKYO. I've seen where the mechanism is hitting the top inside that dust cover and it causes the symptom you are describing. Try your game without that dust cover and see if it helps. The dust cover plastic can be trimmed if needed.
Re: Nishijin not cycling completely
The first picture shows that its a Nishjin Mr Fall
Ian#UKPachinko
Re: Nishijin not cycling completely
see 4th post.. the first pic was a mistake... problem is with the machine in the second post.. yes looks like a sankyo machineOriginally Posted by Drunkenclam
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: Nishijin not cycling completely
Sorry
Ian
Re: Nishijin not cycling completely
Sorry
"Blowing smoke rings at the moon."
Posting Permissions
Reply With Quote