Results 1 to 18 of 18

Thread: Battle Counter setup

  1. #1
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Battle Counter setup

    Hello my friends.

    Tomorrow i receive a few battle counters. I own a machine with crystella frame, that seems to be quite similiar to victor frame on inputs/outputs. I ordered bunch of battle counters that im also glad to sell leftovers here if they work fine. Can you see on these pictures that does these plugins fit to crystella outputs that looks to be same as on lumina frame? Thank you.

    http://page13.auctions.yahoo.co.jp/j...ion/r164954348

  2. #2
    Kungishi jmaclerran's Avatar
    Join Date
    Mar 2006
    Location
    Lewiston ID
    Posts
    1,012
    Thanks
    2,803
    Thanks Received
    1,136

    Default Re: Battle Counter setup

    BattleCounterHookup.jpg
    This diagram should help with your installation.
    The type of battle counters you have will work great on this frame.
    Just look for the band of wires with a Blue tag, and hook up the colors according to the diagram.
    I've never met a Pachi I didn't like

  3. The following 5 users say "Thanks" to jmaclerran


  4. #3
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    Hello! samll problem, the head of blue tag lines have wrong type of connector (i think), tthe end of the wire looks like these type of connectors http://thumbnail.image.rakuten.co.jp...rness-main.jpg Should they be different than those? Green tag lines have type of connector that fit to my terminal?

  5. #4
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    i opened my battle counter to come up with alternative solution. Inside the main board of battle counter, there is few connectors. if i switch green tag connector and blue tag connector in the main board, would that be safe solution? i mean that if i plug green tag connector to blue tag line place on mainboard would that fix my problem?. all right, thank you

  6. #5
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Battle Counter setup

    Without see detailed pictures and the writing on the tags. I wouldn't advise anything.

    Of course you could cut and splice the connectors on. But if they have the same plug configuration then swapping would work. But unless I can see clearly. I wouldn't like to say.
    Ian #UKPachinko

  7. The following 2 users say "Thanks" to Drunkenclam


  8. #6
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup


  9. #7
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    IMG_20161219_152502406.jpgRCD


    Here you can see blue and Green connector. They can be switched easily. Would that Fix myconnector problem?IMG_20161219_152502406.jpg

  10. #8
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    15645325_353395988364090_1691562268_n.jpg

    Here is my Pachinko CN1, CN 2 ETC terminal. I really do apreciate your help on my situation Thank you!

  11. #9
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    I have now translated what blue tag line and green tag line says. They both have same text on the tag. It says following "jackpot, red . white, star (blue . yellow) Probability change (black . brown).

    Both coloured tag-line wires have same type of coloured wires, but different heads. Whats the difference between blue tag line and green tag line?

  12. #10
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Battle Counter setup

    Normally voltage input or contact input.
    So if you plug the green harness into the blue plug. That should do the trick.


    Easiest way to test is to only connect the 24vac power wires (normally red and yellow)

    Then short out the pins on the start wire and see if the counter starts...well counting on every short.
    Ian #UKPachinko

  13. The following 2 users say "Thanks" to Drunkenclam


  14. #11
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    Thank you I will report test results soon. I also bought this new stepdown transformer that i havent yet received. Do you think this is powerful enough for my machine? I plan to plug my 100v - to 24vac transformer to that. Is it safe?

    http://www.ebay.com/itm/Yazawa-HTDC2...cAAOSwux5YMqUp

  15. The following user says "Thanks" to Shirogane


  16. #12
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Battle Counter setup

    Not sure. The listing state

    ● can not be used product
    [Liquid crystal display certain ones of electronic jar pot, microwave, such as electronic rice cooker
    [Video and audio equipment] TV, component, PC, [such marked with AC motors], such as CD / MD players refrigerator, washing machine, futon dryer
    Ian #UKPachinko

  17. The following 2 users say "Thanks" to Drunkenclam


  18. #13
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    You are correct. It sounds kinda low quality voltage converter. Atleast there is coming second 500w heavy Duty stepdown converter so i might use that .

  19. #14
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Battle Counter setup

    The connections on the back of the machine should be the same as this one

    http://daiichi.net/pdf/sankyo/63.pdf

    You want 3, 4 and 5
    Ian #UKPachinko

  20. The following 3 users say "Thanks" to Drunkenclam


  21. #15
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    Just wanted to give big thanks to all fellow members over here. Everything is working perfect now! Counter counts every pocketed balls, and jackpots, so its like perfect now. HUGE thanks also to drunkenclam for pointing out yahoo Japan auction where i got these battlecounters. I might have few counters to sell if anyone is interested These model are Asahi Pushi Smileyand they fit to crystella frame.

  22. The following 2 users say "Thanks" to Shirogane


  23. #16
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    Oh i also wanted to give a warning. I earlier asked that are those voltage transformers any good? Well i ordered one 1000w converter, and it broke first time testing it with amp Quality voltage transformers are much heavíer and expensive. Now i got excellent safe voltage transformer.

  24. #17
    Tokie Owens Snowblur's Avatar
    Join Date
    Mar 2015
    Location
    Clinton Township, MI
    Posts
    21
    Thanks
    6
    Thanks Received
    11

    Default Re: Battle Counter setup

    Hello,
    I was wondering if you still had some counters you were willing to sell? Would you be able to private message me with a price if you still are willing to part with them? Thank you.

  25. #18
    Tokie Owens Shirogane's Avatar
    Join Date
    Dec 2016
    Location
    Kuopio
    Posts
    26
    Thanks
    18
    Thanks Received
    29

    Default Re: Battle Counter setup

    Hi Snowblur. I made a salepost to member trade area. I think charging something like 60€ + shipping for one unit. They come with installation board and many different kind of connectors. I can also throw one splice for free. Remember these are not new and may have some small wear. These also have small musky smell because they are taken from parlor. smell might remove if cleaned with alcohol? Nothing serious.

Similar Threads

  1. Battle counter
    By Pachinko Botan in forum Yahoo Japan - Auction Area
    Replies: 11
    Last Post: 03-03-2016, 01:39 PM
  2. Battle counter help
    By alucard7x7 in forum Modern Pachinko
    Replies: 4
    Last Post: 01-27-2016, 05:58 PM
  3. Battle Counter Help
    By Card Shark in forum Pachinko Modifications
    Replies: 6
    Last Post: 06-15-2012, 09:25 PM
  4. Battle Counter
    By mbodi in forum Modern Pachinko
    Replies: 53
    Last Post: 08-14-2010, 09:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •