Results 1 to 3 of 3

Thread: yamasa goes into error/alarm after 2-3 minutes of inactivity

  1. #1
    Tokie Owens puckhead's Avatar
    Join Date
    Nov 2016
    Location
    NY
    Posts
    1
    Thanks
    0
    Thanks Received
    0

    Default yamasa goes into error/alarm after 2-3 minutes of inactivity

    my yamusa slot goes into error E0 and the alarm sounds after 2-3 minutes of being on. if you play it, and feed it tokens it will not go into alarm mode. you can feed tokens 30 secs apart, and it stays good. no tokens for 2 min or so, and it errors. it is always able to be reset. i disconnected the coin mechanism and with it disconnected it never goes into error, you can leave it on for days. hook up the coin mech plug, and in 2-3 min its in error mode. i was thinking one of the opto sensors may have been dropping out, so i replace both optos on the coin sensor board, same issue. i watched the leds on the main board, when it goes to error i thought one of the coin sensor leds might blink, but they dont. no change in the leds, but the alarm blares away. there couldnt possible be a inactivity setting, could there? anyone ever heard of this happening? i have no clue what to do next. i reseated all the connectors, etc. i dont want to throw parts at it.

    thanks much
    mike

  2. #2
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: yamasa goes into error/alarm after 2-3 minutes of inactivity

    sorry i cant really help ya but wanted to say



    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  3. #3
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    6,029
    Thanks
    6,576
    Thanks Received
    3,677

    Default Re: yamasa goes into error/alarm after 2-3 minutes of inactivity

    Hello Mike and welcome to the group!

    This is a new one to me, sorry I can't help but others should be along.

Similar Threads

  1. Pachislo stuck on a CR error code and alarm going off. Hard reset not helping.
    By devparrish in forum Pachislo Technical Support Tickets
    Replies: 4
    Last Post: 01-01-2016, 02:36 AM
  2. Yamasa playboy 88 error???
    By pinballfixer2 in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 02-11-2015, 06:02 AM
  3. 98 Yamasa Big Wave EO error
    By Iguannaman in forum Pachislo Technical Support Tickets
    Replies: 6
    Last Post: 05-03-2013, 01:27 PM
  4. new sea story error or not and alarm
    By The13bats in forum Modern Pachinko
    Replies: 2
    Last Post: 01-02-2013, 03:54 AM
  5. Yamasa machine error code
    By Drugdoc in forum Model Talk
    Replies: 5
    Last Post: 05-01-2005, 12:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •