Ooooo....shiny. Not.

[MNpin66]

Is there something that works to shine up pachinko balls? One of the machinesi got came with a ton of balls. There are some that are nice and shiny. The majority are not. I have culled out the pitted rusty ones, but the machine is now clean and i will be darned if dirty balls are going through it. Was just trying to save as many as i could......

[Gmwd]

I use a vibrator bowl filled with walnut and turtle wax liquid


Sent from my iPad using Tapatalk

[Moparformances]

nothing wrong with dull or not shiny balls so long as there clean.. NO RUST!!!!!!!!!!!!!!!!!!!!!!

i use a vibratory tumbler as well

several members use hot hot water and clr

[Jack The Lad]

I would be interested to Know what make and type of tumbler you are using ...

[Moparformances]

cant get the web site to open so i can link it


i have 2 i like them so much (ya ya 2 is overkill)

cabella brand

[Peteybob]

Here is what I have and using fine grit walnut shells. A smaller unit for apartment life
http://www.harborfreight.com/dual-dr...ler-67632.html

[Moparformances]

Here is what I have and using fine grit walnut shells. A smaller unit for apartment life
http://www.harborfreight.com/dual-dr...ler-67632.html

i need to find a large wet tumbler like that that wont break the bank...

[Spyder138]

I have both a dual drum and a vibrating tumbler. Both work well. The vibrating tumbler is much louder so I usually turn it off at night. I can let the drum run all night and not be bothered by it. I think the vibrator may polish in less time, but I can run it fewer hours a day. Keep an eye on eBay and craigslist and you may be able to find a good deal on one.

[Gmwd]

I had mine from a garage sale when I first got into ammo reloading . cant recall what the label use to say. If your in a mad rush for one you can go to a local gun store. Garage sales are the cheapest

[emmadog]

i need to find a large wet tumbler like that that wont break the bank...

i've seen diy plans online for wet tumblers. guys use pvc pipe for the tumbling chamber but baffles (small pvc cut into quarters lengthwise and screw in) have to be installed inside to allow for proper tumbling.

[Moparformances]

i've seen diy plans online for wet tumblers. guys use pvc pipe for the tumbling chamber but baffles (small pvc cut into quarters lengthwise and screw in) have to be installed inside to allow for proper tumbling.

i know a guy, that has exactly that.. but he is way more creative and has access to all the tool to make his own motor base.. he made his from 10" pvc.. its huge but powers threw the brass

[samslack]

Local gun shop usually has one they are also used for cleaning spent shells to be reloaded

Sent from my SM-N920V using Tapatalk

[mxfaiman]

I use a vibrator bowl filled with walnut and turtle wax liquid


Sent from my iPad using Tapatalk

My go to formula for cleaning nails and balls.