Parts for Catch me 500 machine

[Bill m]

Looking for the top front door red plastic cover and misc light bulbs for this machine. Made in 2000 but not sure by who.

[Meathead]

Your machine is a Net. I don't consider it likely you will find the plastic you need. You might consider fashioning one out of some plastic from a taillamp or having a plastic shop (TAP Plastics?) make something. Or just fill the void with something else.

As far as the bulbs go, take a pic of the bad ones and we might be able to direct you where you can find them. eBay is a good start.

[Meathead]

You might do well just finding an oval reflector lens. Cover the top of the hole with a slightly larger lens. Maybe use a semi-temporary way to fasten like a few dabs of hot glue.

I found this with a quick search for "oval reflector" on Amazon. It might not look perfect but it won't be as glaring as a hole.

image.jpg

[Bill m]

Thanks for the good ideas about replacing the missing lens. I think that oval reflector lens will work, if not I have an old taillight lens I can cut up to fit maybe.

this machine looks a lot different then any of the other machines I have bought recently I need to do some research on the company, Net, that made it to see what I can find. In general Im having a very hard time finding signal flow diagrams or detailed board schematics for these machines. I guess that's because there made in Japan for Japanese use. Any ideas on that from anyone would be appreciated. Thanks again for your help...