Results 1 to 7 of 7

Thread: Hello from CT...

  1. #1
    Tokie Owens Zacker's Avatar
    Join Date
    May 2015
    Location
    East Coast USA, CT.
    Posts
    15
    Thanks
    8
    Thanks Received
    8

    Default Hello from CT...

    Hi all, just got ahold of a "new to me" pachi machine, its an o.der Aruze machine called Jirokichi. It seems to work except for the wheels dont spin...lol im hoping someone can guide me through this thing and help me get her spinnng again.

  2. #2
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Hello from CT...

    Pachinko or Pachslo??

    a few pics would help.. also any further info might help as well... do you know if it worked?? have your seen it work? do you have tokens or balls for it??

    and of course

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  3. The following user says "Thanks" to Moparformances


  4. #3
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,308
    Thanks
    67,899
    Thanks Received
    44,912

    Default Re: Hello from CT...

    WELCOME!!!

    "Blowing smoke rings at the moon."

  5. The following user says "Thanks" to MrGneiss


  6. #4
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,333
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: Hello from CT...



    Welcome to PachiTalk

    I think Jurokichi is a Pachislo made by Aruze around 1999

    http://www.arcade-history.com/?n=jur...detail&id=8413

    If you are new to pachislos, then you may find this link to a PDF guide helpful to refer to, you should then be able to see what works or doesn't work on your machine.

    pachitalk/Manuals/Pachislots_Operation_Manual.pdf

    Some machines are Max Bet only (needing 3 tokens per play / spin) but I believe being an older machine it should work on 1,2, or 3 tokens?

    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  7. The following 2 users say "Thanks" to hanabi


  8. #5
    Tokie Owens Zacker's Avatar
    Join Date
    May 2015
    Location
    East Coast USA, CT.
    Posts
    15
    Thanks
    8
    Thanks Received
    8

    Default Re: Hello from CT...

    Thanks All...
    Yes it is Pachislo Machine made by Aruze Corp.
    I don't have any pics yet but it as made in 1998 according to the writing on the front glass.
    I don't know its past but it looks like its in real god shape, its pretty clean inside not dusty, no spiders or cobwebs and everything just looks "good" even all the little white connectors n the plugs are all nice and clean.
    It lights up, it makes noises it registers the tokens when you put them in, it takes up to 50 then will spit out any others you put in.
    The problem am having is when I plug it in and turn it on, I have to go through to whole resetting process to make it accept tokens or else thy will just go in and come right back out. Once I do the reset process as per the sticker inside the machine, I can put the 50 tokens in but then when I hit any of the bet buttons (12 or Max Bet) and push the joy stick down, the reel do not spin. also, the stop buttons do not light up... Im not sure they should but im guessing they would.
    so I don't know if the buttons are bad, the stick is bad or the reels are bad. But I do notice, when I move the joy stick, there's a light on the mother board in the back of the machine, the board that's locked under Plexiglas, there is a red led that lights up when I move the stick so it seems to me that would indicate that the sick is working.

    I checked the two fuses near the reset key, on / off button and they are good. also, what is the push button for that is next to those fuses? and there is also a yellow push button o the circuit board on the door that im not sure what it does. The both seem to also light up a red LED on the locked circuit board. as well as the two slide switches on the x near the reset key, on / off switch.
    lol... now I feel like I just wrote a noel... sorry
    there's the exact same machine for sale on Ebay, here's the listing so you can see the pics of it... and he has video f it as well. scroll down to see the video... http://www.ebay.com/itm/281702890157...%3AMEBIDX%3AIT

    thanks so much!

  9. The following 3 users say "Thanks" to Zacker


  10. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Hello from CT...

    Welcome Aboard



    Ian #UKPachinko

  11. #7
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: Hello from CT...

    its possible either the contacts in the joystick or buttons need cleaning.

    either the joystick or 3 button assembly can be removed from the door with no problems.
    幸運わんわん Luckydog or Yukiwanwan in Japanese

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •