Results 1 to 7 of 7

Thread: Battle counter - Lumina frame- help...

  1. #1
    Fever Hunter mosheste's Avatar
    Join Date
    Feb 2009
    Location
    Jerusalem
    Posts
    228
    Thanks
    359
    Thanks Received
    531

    Question Battle counter - Lumina frame- help...

    Ive just received two battle counters which i want to assemble to my Lumina Frames - I have no idea how to do it ...Ive posted some pictures of the connectors plus the Japanese instructions - any help will be appreciated (For example I don't know if i still need to have a separate power supply for them or do they arranges in such a way that i don't need to ...also i don't know which wire go to which place...)

    Thank you!

    Attached Images Attached Images

  2. #2
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,335
    Thanks
    51,524
    Thanks Received
    30,711

    Smile Re: Battle counter - Lumina frame- help...

    I'm not very technical myself,

    but this link from Daverob should be helpful to you

    http://www.pachitalk.com/forums/pach...terminals.html



    Also, a couple of other links i found whilst searching PT

    http://www.pachitalk.com/forums/pach...e-counter.html


    http://www.pachitalk.com/forums/modern-pachinko/31196-battle-counter-translations.html

    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  3. The following 3 users say "Thanks" to hanabi


  4. #3
    Fever Hunter mosheste's Avatar
    Join Date
    Feb 2009
    Location
    Jerusalem
    Posts
    228
    Thanks
    359
    Thanks Received
    531

    Default Re: Battle counter - Lumina frame- help...

    Thank you Hanabi...Ive looked at those posts but the problem is that i couldn't find a correlation to my connections...especially in the power supply department - i have two pairs going out from the battle counter on one pair there is a sticker which says "24 volt" and another pair with nothing on it - the two pairs fits each other - but i don't know if i should plug the to each other or to an external source...here are closeups for each pair...
    Attached Images Attached Images

  5. #4
    Fever Hunter mosheste's Avatar
    Join Date
    Feb 2009
    Location
    Jerusalem
    Posts
    228
    Thanks
    359
    Thanks Received
    531

    Default Re: Battle counter - Lumina frame- help...

    Here is a picture of the Battle counter - If this helps...(I'm referring to the two bottom ones)
    Attached Images Attached Images

  6. #5
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,106
    Thanks
    8,726
    Thanks Received
    18,435

    Default Re: Battle counter - Lumina frame- help...

    You can use the male or female plug ends, they are interconnects between multiple battle counters. The yellow and red are the power lines, any other wires are meaningless for your installation unless you have the two machines right next to each other and want to connect the counters together for power reasons. Both counters will light up for a bit during a bonus if connected together. The smaller multi-pin plug/socket are just signal lines as are the extra wires in the larger 6 pin plug/socket.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  7. The following 4 users say "Thanks" to compirate


  8. #6
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: Battle counter - Lumina frame- help...

    when I got my battle counter from Arby he included a connector he had added on the power wires to tap directly into the 24 volt wires coming from the transformer.

    you just put the sides on the two wires in the U shaped slots and crimped a part to make the power connection.

    I'm sure radio shack or other places should sell them. its much easier than stripping and soldering the wires to the 24 volt wires
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  9. The following user says "Thanks" to luckydog


  10. #7
    Hyah! rubberratt's Avatar
    Join Date
    Jan 2007
    Location
    Nebula M78
    Posts
    1,969
    Thanks
    2,484
    Thanks Received
    2,631

    Default Re: Battle counter - Lumina frame- help...

    All of my Pachis are connected to the x-formers with wire nuts, so I connect the BCs that way, and share the power supply.

    Just MAKE DAMN SURE that you wire them to the 24V side, or they make a very expensive noise (can/IC pop)

    If you are going to put these on a Lumina then the Asahi Minna BC guide will help
    Last edited by rubberratt; 11-10-2009 at 08:36 PM.

    せぶん戦闘機 せぶん

  11. The following 2 users say "Thanks" to rubberratt


Similar Threads

  1. battle counter on lumina frame
    By luckydog in forum Pachinko Modifications
    Replies: 0
    Last Post: 04-20-2011, 06:16 PM
  2. battle counter on lumina frame
    By luckydog in forum Pachislo Modifications
    Replies: 0
    Last Post: 04-20-2011, 06:16 PM
  3. Battle Counter.. Fuji Frame?
    By mr. fixx in forum Pachinko Modifications
    Replies: 1
    Last Post: 12-02-2009, 01:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •